BMW Group - New technology campus for 3D printing goes on stream

BMW Group - New technology campus for 3D printing goes on stream

25.06.2020: BMW Group builds on additive manufacturing, with skills consolidated at single site - Campus as centre for production, research and training - Comprehensive in-house expertise to advance additive manufacturing technology - Accelerated vehicle

BMW Group builds on additive manufacturing, with skills consolidated at single site




- Campus as centre for production, research and training

- Comprehensive in-house expertise to advance additive manufacturing technology

- Accelerated vehicle development and production integration

- €15 million investment in new site

- 2019: annual output totalled more than 300,000 parts





The BMW Group has today officially opened its new Additive Manufacturing Campus. The new centre brings together production of prototype and series parts under one roof, along with research into new 3D printing technologies, and associate training for the global rollout of toolless production. The campus, which came at an investment of €15 million, will allow the BMW Group to develop its position as technology leader in the utilisation of additive manufacturing in the automotive industry.



Speaking at the opening ceremony, Milan Nedeljković, BMW AG Board Member for Production, said: “Additive manufacturing is already an integral part of our worldwide production system today, and established in our digitalisation strategy. In the future, new technologies of this kind will shorten production times even further and allow us to benefit even more fully from the potential of toolless manufacturing.”



Daniel Schäfer, Senior Vice President for Production Integration and Pilot Plant at the BMW Group, adds: “Our goal is to industrialise 3D printing methods more and more for automotive production, and to implement new automation concepts in the process chain.



This will allow us to streamline component manufacturing for series production and speed up development. At the same time, we are collaborating with vehicle development, component production, purchasing and the supplier network, as well as various other areas of the company to systematically integrate the technology and utilise it effectively .”

 



Many years of in-house expertise and cooperations advance the technology




Jens Ertel, Director of the Additive Manufacturing Campus: “Over the last 30 years or so, the BMW Group has developed comprehensive skills, which we’ll continue to enhance on our new campus, which has the latest machines and technologies. In addition, we develop and design components that are faster to produce than by conventional means, offer flexibility in terms of  their form, and are also more functional.”



Ertel continued: “We are working hard to mature additive manufacturing fully and benefit from it as far as possible throughout the product life-cycle, from the first vehicle concept through to production, aftersales and its use in classic vehicles.”



Last year, the BMW Group produced about 300,000 parts by additive manufacturing. The Additive Manufacturing Campus currently employs up to 80 associates and operates about 50 industrial systems that work with metals and plastics. Another 50 systems are in operation at production sites around the world.



Access to the latest technologies is gained through long-standing partnerships with leading manufacturers and universities, and by successfully scouting for industry newcomers. Back in 2016, BMW i Ventures – the venture capital arm of the BMW Group – invested in the Silicon Valley-based company Carbon, whose DLS (Digital Light Synthesis) technology achieved a breakthrough in planar processes, using a planar light projector to enable super-fast component production.



Further investments were made in 2017, when the BMW Group became involved with Desktop Metal, a start-up specialising in additive manufacturing of metal components and developing innovative, highly productive manufacturing procedures. Close collaborations with Desktop Metal continue. In the same year, BMW i Ventures invested in the US start-up Xometry, the world’s leading platform for on-demand manufacturing. With its extensive network of manufacturing companies specialising in fields such as 3D printing, Xometry provides fast access to components.



The latest investment was in the German start-up ELISE, which allows engineers to produce component DNA containing all the technical requirements for the part, from load requirements and manufacturing restrictions to costs and potential optimisation parameters. ELISE then uses this DNA, along with established development tools, to automatically generate optimum components.



By cooperating with innovative partners and universities, the BMW Group is working to accelerate the application of additive manufacturing technology and generate its own suitable portfolio of manufacturing processes.

 


Additive manufacturing in research and pre-development




The pre-development unit of the Additive Manufacturing Campus optimises new technologies and materials for comprehensive use across the company. The main focus is on automating process chains that have previously required large amounts of manual work, to make 3D printing more economical and viable for use on an industrial scale over the longer term.



When it comes to developing 3D printing processes for use on an industrial scale, research projects are especially important. Such as the Industrialisation and Digitisation of Additive Manufacturing for Automotive Series Production (IDAM) project as well as the IDAM project, both supported by the German Ministry of Education and Research.



With IDAM, the BMW Group and its 12 project partners are crucially paving the way for the integration of additive manufacturing into series production environments within the automotive industry. At the Additive Manufacturing Campus, a production line is being set up that replicates the entire process chain, from the preparation of digital production through to manufacture and reworking of components.




The IDAM team are now preparing it for the specific requirements of series, individual and spare-part production. The production targets confirm the status of this collaborative undertaking as a lighthouse project: output is expected to total at least 50,000 series components a year, with over 10,000 individual and spare parts, all produced in very high quality and enabling the BMW Group to help strengthen Germany’s role as a pioneer in 3D printing.



The Additive Manufacturing Campus is also making a significant contribution to series production of plastic parts. In the POLYLINE project, the focus is on aspects such as digitally linking process steps, and the development of a consistent quality assurance methodology for the entire process chain.



The Additive Manufacturing Campus will provide the backdrop for the project’s consortium of 15 partners to develop and test a future-proof, fully linked, automated production line for plastic components. Findings from the project are expected to help reduce manufacturing costs by as much as 50 percent, making a vital contribution to series production. In addition, integrated quality assurance methods will increase the stability of technologies and make manufacturing more sustainable.

 


Training across the company





As well as manufacturing components, the team at the Campus provides personal consultations and training courses for associates across the company. “To roll these technologies out successfully, we need well-trained colleagues across the network who fully understand their advantages and features.



To use them, designers will need to adopt a new way of thinking and an entirely new approach as they devise the upcoming components. 3D printing allows almost any shape to be produced, paving the way for new designs and functions. Nowadays, there are countless components that can only be manufactured additively,” Jens Ertel explains.



BMW Group production facilities around the world all manufacture 3D-printing components already, be it for prototypes or production, or as country-specific parts for customers. Manufacturing parts where they are needed is a sensible solution for the BMW Group, and so additive manufacturing processes are a useful complement to existing production technologies.

 


Applications in series production



The BMW Group first started the additive manufacturing of prototype parts back in 1991, for concept vehicles. By 2010, plastic-and metal-based processes were being rolled out, initially in smaller series, to produce items such as the additively manufactured water pump wheel in the DTM race cars.



 Further series production applications followed from 2012 on, with a range of components for the Rolls-Royce Phantom, BMW i8 Roadster (2017) and MINI John Cooper Works GP (2020), which contains no less than four 3D-printed components as standard.





Carolin Seidel- photos BMW


Permanent-URL: http://www.automobilsport.com/bmw-group-new-technology-campus-3d-printing-on-stream---208142.html

25.06.2020 / MaP

More News

Mercedes-Benz and NVIDIA to Build Software-Defined Computing Architecture for Automated Driving Across Future Fleet
24.06.2020
Auto and Computer Industry Leaders Intend to Join Forces and Enable Next-Generation Fleet with Software Upgradeability, AI and Autonomous CapabilitiesMercedes-Benz, one of the largest manufacturers of premium passenger cars, and NVIDIA, th more >>
BMW announces support for Digital Key for iPhone
23.06.2020
A secure and easy way to use iPhone as a car key to lock, unlock, drive, and share keys with friends.At today’s Apple Worldwide Developer Conference it was announced that BMW will become the first carmaker to enable its more >>
Ford Co-Pilot360™ Technology Adds Hands-Free Driving...
22.06.2020
... Over-The-Air Updates and More to Help Ford Customers Feel More Relaxed     Ford Co-Pilot360™ Technology – a comprehensive collection of available driver-assist features – adds and improves offerings includi more >>
Leading Urbantech Accelerator Urban-X by Mini reveals eight startup cohort
22.06.2020
...launches first-ever fully remote program URBAN-X, the leading accelerator for startups reimagining city life, and backed by MINI and Urban Us, announces its eighth cohort of companies. Reflecting the current climate, all com more >>
Avanci Awarded as Technology Pioneer by World Economic Forum
16.06.2020
• The World Economic Forum announced its selection of 100 of the most promising Technology Pioneers of 2020, who are shaping industries from agriculture to healthcare while also working on sustainability issues and much more.• Avanci was selected for its work in accelerating innovation for the Internet of Things, by enabling sharing of key technologies more >>
INEA implementing the Innovation Fund
15.06.2020
As of 15 June 2020, INEA will be managing the Innovation Fund (IF).The Innovation Fund, which is the successor of the NER 300 programme, is one of the world's largest funding programmes for demonstration of innovative low-carbon technologies with the objective more >>
Jobs of the Future and the Emerging Megatrend
12.06.2020
•    We are living through a fundamental transformation in the way we work. Automation and 'thinking machines' are replacing human tasks and jobs•    How humans respond to these challenges and opportun more >>
UN to explore role of science and technology policies in Covid-19 recovery
05.06.2020
Science, technology and innovation (STI) policies will play a key role not only in post-COVID-19 recovery plans, but also in the decade of action to deliver on the 2030 Agenda for Sustainable Development. more >>
Support for innovation in the European car industry: EIB finances Gestamp's RDI strategy to the tune of €200 million
26.05.2020
    EU bank funds will contribute to the development of safer, lighter and more environmentally friendly vehicles    Agreement supported by Investment Plan for EuropeThe Spanish multinational Gestamp, which specialises more >>
SEAT and David Calle join forces to boost youth education
05.05.2020
    The teacher, YouTuber and founder of Unicoos is the company’s new Ambassador of Education and Youth Empowerment    The carmaker manufacturer and the revolutionary teacher aim to jointly promote an educational change in Spain, so that young people can successfully face the labour challenges of the future  &nb more >>
AIWAYS introduces world-first EV battery technology
04.05.2020
•    Unique ‘sandwich’ structure reduces risk of battery safety incidents •    World-first structure makes it impossible for leaking coolant to enter the battery module, even after substantial impact more >>
The Circularity Challenge: Finding novel solutions for a circular economy
23.04.2020
BASF, Greentown Labs and Stanley Black & Decker select five start-ups to drive circular innovations for plastics, energy storage and digital solutions.Greentown Labs, the largest cleantech start-up incubator in North America, and BASF, one o more >>
"Reclaim the Future” – the FUTURE FORUM by BMW Welt to cooperate with 1E9.
22.04.2020
•A total of eight events are planned at BMW Welt, which will take place digitally for the time being, as well as a joint event at the 1E9 conference. •The series titled “Reclaim the Future” will feature trend-setting themes examined and discussed by experts between April and December 2020. more >>
AIWAYS granted patents for autonomous EV charging solution
17.04.2020
•    European and Chinese patents cover robot design and charging method•    Autonomous mobile fast charging robot, ‘CARL’, offers a cost-effective and flexible charging solution•& more >>
Cupra harnessing 3D printing to boost speed, safety and efficiency
27.03.2020
    New Leon Competición model to use 3D printed door mirrors, air intakes and cooling intakes    CUPRA using state-of-the-art multi-jet fusion technology for the race vehicle    3D printed parts tested in wind tunnel face gusts of more than 180mph    Parts help reduce fuel consu more >>
The world’s first aerogels made from scrap rubber tyres
19.03.2020
Photo caption: A team of NUS researchers led by Assoc Prof Duong Hai-Minh (front row, first from left) and Prof Nhan Phan-Thien (front row, centre), developed the world’s first aerogels made from scrap rubber tyresA team more >>
Porsche presents innovative 3D-printing technology for bucket seats
17.03.2020
Concept study on individual seat fitting inspired by motor sportsPorsche is revolutionising sporty seating: the company presents an innovative alternative to conventional bucket seat upholstery with the concept study “3D-printed bodyform full-b more >>
BradyPrinter - Identify cables 3 times faster
14.03.2020
Experienced operators can print and manually apply a flag label on a cable in 15 seconds. With the new BradyPrinter A5500 Flag Printer Applicator they can significantly increase production output by flagging cables in 5 seconds. more >>
New Ford Tec steers clear of ditches and drops to help drivers stay on the road
13.03.2020
Driving in rural areas can be tricky when unmarked road edges become ragged and give way to open land, muddy ditches and sheer drops.  *Driving at night – in unlit areas especially – can be a challenge.Most road fat more >>
Fast Company announces CAKE among the WORLD'S MOST INNOVATIVE COMPANIES
10.03.2020
CAKE, the Swedish manufacturer of lightweight electric off-road performance motorcycles, has been selected to the list of the Most Innovative Transportation Companies 2020 by Fast Company -The only 2 wheeled company to make the list. CAKE is among t more >>
FPT Industrial F28 “Diesel of the Year®” 2020 displayed at Conexpo Show
10.03.2020
The “Diesel of the Year®” landed in Las Vegas for its premiere in North America. The F28 was unveiled last November and has been recently awarded “Diesel of the Year®”. This prestigious award is given on an annual basis by Diesel magazine and recognizes the best innovation in the development and manufacturing of diesel engines in all industrial and automotive app more >>
SEAT will be able to detect if you fall asleep at the wheel
06.03.2020
    SEAT working with technology start-ups to drive better road safety    Computer Artificial Intelligence ensures driver is awake and not distracted    36% of collisions are due to driver distraction or tiredness    Active glazing technology another route of development for future SEAT more >>
The Goodyear reCharge Concept - Making Tyre Changing Easy with Customized Capsules that Renew your Tyres
04.03.2020
The Goodyear reCharge is a revolutionary self-regenerating concept tyre that can adapt and change to meet individual mobility needs."Goodyear wants the tyre to be an even more powerful contributor to answering consumers' more >>
FPT Industrial joins European Research Project for Nextgeneration batteries
03.03.2020
FPT Industrial is participating in the European battery research project SeNSE, officially launched last month. Together with five other industrial companies and five research institutes, the Brand will work over the four coming years to find solut more >>
From bottle to fabric: Seat upholstery made of PET
25.02.2020
New Audi A3 with sustainable interior concept        Up to 45 PET bottles with a capacity of 1.5 liters used per seating system        Many additional components made from secondary raw mate more >>
A Porsche as personal as your own fingerprint
24.02.2020
 Innovative printing method for body paintworkIt's already the case that hardly any Porsche is the same as another. But from now on, the 911 can even be as unique as the papillary lines on a human fingertip. Using an innovative direct printing meth more >>
Hyundai and Kia Develop World’s First ICT Connected Shift System
20.02.2020
    Information and communication technology (ICT) automatically shifts to optimal gear based on road and traffic conditions ahead    Improves driving comfort and fuel efficiency by minimizing unnecessary shifts through predictive gear-shifting control system    Future developments to include consideration more >>
Porsche Consulting: Three new offices and an innovation lab
18.02.2020
   Management consultancy grows revenues by 17.4 percent and opens three new officesPorsche Consulting recorded revenues of €203.1 million for 2019, which represents a year-over-year growth rate of 17.4 percent and a new a more >>
SEAT - This is how you explore the future
17.02.2020
A global technology hub    SEAT and Xplora are looking for innovative solutions in one of the world's biggest technology hubs    In Tel Aviv (Israel) there are 6,600 startups, 800 of which are dedicated t more >>
BMW i Ventures Announces Investment in AutoFi.
13.02.2020
BMW i Ventures announced today an investment in AutoFi, a technology company transforming the way cars are bought and sold.Headquartered in San Francisco, CA, AutoFi is a retail platform that allows car buyers to purchase and finance a car from a variety of financial institutions within or outside the dealership. Thanks to AutoFi’s deep integration more >>
Cupra - A 3D printed racecar
06.02.2020
    CUPRA commits to 3D printing in the development of the new Leon Competition    The door mirror, air intakes and cooling intakes have been produced with state-of-the-art HP Multi Jet Fusion technology& more >>
Hengst: Premiere for Blue.on in the new Opel Astra
05.02.2020
Lifetime functional safetySystem has won two German innovation awardsThe concept of the Blue.on filter consists of a housing, a pipe with integrated filter bypass and no more >>
Newly established SKODA AUTO DigiLab India and Software Development Centre support SKODA-led INDIA 2.0 project
31.01.2020
› ŠKODA AUTO DigiLab India is the fourth innovation hub, joining those based in Prague, Tel Aviv and Beijing› Dedicated Software Development Centre in Gurugram and P more >>
Ford develops 3D-printed locking wheel nuts to thwart thieves
30.01.2020
    Ford-patented unique lock nuts, personalised by owners, could prevent alloy wheel theftsAs car security systems become increasingly more sophisticated, thieves are targeting car parts instead, including alloy wheels. more >>
Lexus releases report on the future of luxury
24.01.2020
    Lexus USA commissioned a study of more than 3,200 Americans from Gen Z to Baby Boomers on what they consider ‘luxury’    Exceptional experiences and quality top the list of demands    New must-haves include time for the occasional “digital detox”, a desire to be unique and an increased focus more >>
Lexus Zero Gravity Concept shoots for the moon
23.01.2020
    All the thrill of high-speed space exploration in Lexus’ new Zero Gravity concept design    Karl Dujardin’s dream machine was the top pick from a series of lunar vehicle ideas from leading international designers and architects    Design sketches developed at ED2, Lexus’ European advan more >>
Lexus Lunar by Yung Presciutti
23.01.2020
Lexus Lunar Design Concepts Zero GravityLexus Lunar is a large-scale vehicle designed for safe lunar exploration. It is divided into two parts: the bottom consists of a platform with six rugged wheels, giving the vehicle the freedom to go whereve more >>
Lexus Moon Racer by Yung Presciutti
23.01.2020
Lexus Lunar Design Concepts Zero GravityThe Moon Racer is a recreational, one-person vehicle, designed to cope with different peaks found across the lunar surface, and to let the user enjoy the effects of low gravity, jumping, climbing, racing and discovering the entire moon. more >>
Lexus Lunar Mission by Yung Presciutti
23.01.2020
Lexus Lunar Design Concepts Zero GravityThe Lunar Mission is designed for people to fly to, then walk on the moon. The body design integrates a liquid side form which can reflect the universe during flight.The wings more >>
2001-2021 copyright automobilsport.com