KS-MOTORSPORT - BREMBO zu einer Grp. N - Bremsanlage für Mitsubishi Evo 7, 8 u. 9 Series Super Gr.N

Subject: System technical details Introduction

The aim of this document is to inform the Super group N distributors and the users about the system features and components.

Front tarmac kit
Front gravel kit
Rear tarmac & gravel kit
Calipers technical details
P4 38/44 Aluminium forged mono-bloc caliper.
Front left p/n XA5T0.03
Front right p/n XA5T0.03
P4 26/30 Aluminium 2-pieces caliper
Rear left p/n XA3G2.11
Rear right p/n XA3G2.12
Discs technical details
Front Tarmac
Cast iron disc 355X32 64mm annulus 72 Vanes
Front Gravel
Cast iron disc 300X28 52mm annulus 60 Vanes
Rear
Cast iron disc 295X25,4mm annulus 48 Vanes
Brackets technical details
Front
Aluminium alloy with hard anodizing and heli-coil
Rear
Aluminium alloy with hard anodizing

P.S. The discs inside the kits are already assembly with the specific bells

The recommended working temperature for the Super Gr.N caliper is <200°C, whereas the maximum acceptable working temperature is 220°C.

Over 240°C the seals fitted into caliper can be overheated and they will not guarantee the right performances of the caliper (sealing, roll back, fluid absorption,…).

In order to keep under control the caliper temperature Brembo suggests to use its thermo-tape:

scale 132°C/210°C p/n 025168.10

scale 210°C/260°C p/n 025168.13

If the caliper temperature goes over 240°C the seals have to be opportunely refreshed.

After 1000km of special stage the caliper has to be serviced changing the following components:

1. pistons
2. seals
3. pad abutments
4. bleed screws
5. bridge pipe (if needed)

Conversion Tarmac –Gravel and vice versa
In order to concert a Tarmac kit in a gravel kit it is necessary to change the front brackets and the front disc-bell assemblies. The calipers are the same.

Service kit

Part Number Quantity
Front tarmac kit XA5.S5.XX 1
Assembly Calipers XA5.T0.03/04 2
Assembly Discs XA5.S5.31/32 2
Brackets XA5.S5.42 2
Caliper Screws 05.5829.24 4
Caliper Screws Washer A3.41.10.014 4
Bracket Screws A1.62.41.299 4
Bracket Screws Washer A3.12.01.120 4
Front gravel kit XA5.S5.YY 1
Assembly Calipers XA5.T0.03/04 2
Assembly Discs XA5.S5.21/22 2
Brackets XA5.S5.43 2
Caliper Screws 05.5829.23 4
Caliper Screws Washer A3.41.10.014 4
Bracket Screws A1.62.41.299 4
Bracket Screws Washer A3.12.01.120 4
Rear gravel and tarmac kit XA5.S5.ZZ 1
Assembly Calipers XA3.G2.11/12 2
Assembly Discs XA5.S5.23/24 2
Brackets XA5.S5.14 2
Caliper Screws 05.5829.24 4
Caliper Screws Washer A3.41.11.011 4
Bracket Screws A1.62.41.257 4
Bracket Screws Washer A3.12.01.100 4
Replacement front tarmac parts
Bell XA5.S5.16
Disc 09.9306.30/40
Replacement front gravel parts
Bell XA5.S5.18
Disc 09.9021.10/20
Replacement rear parts
Bell XA5.S5.26
Disc 09.7277.12/22
Caliper
Front & Rear
Brackets
Tarmac–Gravel-Rear
Discs assemblies
Tarmac-gravel-rear

KS Motorsport GmbH, Rainer Kamphausen,
Bergheim, Deutschland
KS-Motorsport@t-online.de