Tweet

HANNOVER MESSE 2009, 20 to 24 April - MicroTechnology goes global

16.02.2009: Miniature solutions that make the world go round Small, smaller, smallest - both capital goods and consumer products are becoming progressively miniaturized. Manufacturers of motors, electronics and semiconductors,

Miniature solutions that make the world go round

Small, smaller, smallest - both capital goods and consumer products are becoming progressively miniaturized. Manufacturers of motors, electronics and semiconductors, medical technology, painting technology and optics - there's hardly an industry today that does not strive to make products that are smaller and more perfect. While the trend towards the miniaturization and functionalization of surfaces continues to gather momentum, manufacturers are facing new challenges in terms of the accurate measurement of micro-surface structures and thin layers.

Until a few years ago it was sufficient to scan surfaces using high-magnification camera systems or mechanical scanning probes, but modern surface metrology requires more sophisticated and sensitive solutions. Such solutions are available from Fries Research & Technology GmbH (FRT). The company will be unveiling the latest innovations in the field of surface measurement at the upcoming trade fair MicroTechnology, which forms part of HANNOVER MESSE 2009 (20 - 24 April: Hall 6).

Fries Research & Technology GmbH (FRT) is an internationally active, medium-sized engineering company founded in 1995. Based in Bergisch Gladbach and owner-operated, it is primarily engaged in the development, manufacture and worldwide distribution of measuring technology and software for the metrological mapping of surfaces at extremely high resolutions. Operating at the micro-/nanometre level, FRT surface metrology systems are designed for the non-contact, non-destructive, and - where required - fully automated investigation of topography, profile, step height, roughness, abrasion, film thickness and many other parameters that affect the quality of the product in question.

The company is divided into three strategic business divisions: "Surface Metrology Systems", "Process Control" and "Services". Surface measuring devices are used as stand-alones in research establishments and R&D departments as well as in fully automated measuring stations for sampling or ongoing product quality control in industry. The business unit "Process Control" makes up special arrays for process-related measurements in the production chain. The "Services" division undertakes contract measurement work, organizes training courses, and provides on-site servicing, spare parts, upgrades and repairs.

The production strategy of FRT Messtechnik has developed the company's expertise in three distinct areas: standardization, modularization and customization. Standardized components such as high-precision mechanisms, control electronics and powerful proprietary software deliver useful cost synergies across a range of products as well as reducing complexity at the manufacturing stage. In particular the software - refined over many years and constantly updated by a programming team - represents one of FRT's important core areas of expertise.

The modular design of the company's measuring systems allows customers to add to their capabilities very easily. In view of the fact that innovation cycles in manufacturing technology are getting progressively shorter, this makes the systems extremely cost-effective and future-proof. And the multi-sensor technology developed by FRT permits a high degree of customization. Not only does it enable the operator to exchange sensors easily; it also means that several sensors can be incorporated into a single system to achieve a combination of different measurement ranges and procedures.

FRT was the first company to introduce this innovation back in 1998, creating a whole new market segment that has since become established throughout the industry. Today FRT offers a wide choice of non-contact, high-resolution sensors, which are capable of scanning surfaces with a beam of light or mapping them via electromagnetic effects with an accuracy measured in nanometres.

The company's customer base extends across different industry sectors and different technologies, with special emphasis on big-name international concerns in the semiconductor, automotive, optical, microsystems and nanotechnology industries in Germany, Europe, Asia and the USA (export quota: 55 per cent). Today FRT's three business divisions "Surface Metrology Systems", "Process Control" and "Services" generate a return on sales (before tax) of nearly ten per cent.

This makes FRT three times more profitable than the industry average for the German mechanical engineering sector (3.4 per cent). Sales growth was led in 2006 by the business division "Surface Metrology Systems", where stronger demand in the core sectors and target markets resulted in a year-on-year increase in sales of 18 per cent. The key drivers of growth here were applications in semiconductor and microstructure technology.

FRT maintains subsidiaries in Switzerland, the United States and China, and operates a distribution and service network in Asia and Europe as well as a branch office in Munich. In recent years the company has won four awards for innovation as well as an award for organizational development.

Five questions we put to Dr. Thomas Fries, CEO of FRT

1. Dr. Fries, are you scared by the continuing miniaturization of technology?


No, not at all. On the contrary, the growing miniaturization of surface structures for capital goods and consumer goods, such as semiconductor products, motors, lenses or paints, together with the fast growth in technology markets worldwide, is a major driver of demand for us.

The trend towards miniaturization is unstoppable now - just compare the size of the first computers with today's notebooks and mobile phones. Companies everywhere - and consumers too, at the end of the day - are looking for products that are both smaller and better. We see progress as the driver of innovation and a challenge. We're not afraid of the future at all.

2. So where do you see the real challenges for surface metrology?

The surface structures of products are becoming more and more sophisticated and complex, because they are undergoing a process of functionalization as well as miniaturization. I am thinking, for example, of the lotus effect in paint coatings. One challenge is to find ways of measuring these micro/nano surface structures with sufficient precision.

Another challenge lies in the fact that manufacturing processes are getting more and more complex - and with them the associated inspection processes. Until a few years ago it was sufficient to scan surfaces using high-magnification camera systems or mechanical scanning probes, but modern surface metrology requires more sophisticated and sensitive solutions.

Take silicon wafers, for example, which are used to make computer chips: during the production process it is necessary to carry out repeated measurements with a high degree of precision - in the nanometre range. In many cases the requisite systems will need to be integrated into the continuous production process, and they must be able to operate non-destructively - so without any physical contact - and to be automatable if required. FRT can supply the right products along with the necessary empirical reference values, because every measuring task is different, depending on the material and area of application.

3. What makes your company different?


What makes us different is our multi-sensor technology. Multi-sensor technology combines a number of different measuring techniques - which would otherwise require a series of separate solutions - into one universal, compact device. Flexible, expandable and future-proof, this device makes it possible to carry out a variety of different measuring tasks at resolutions ranging from a metre down to a nanometre.

Multi-sensor technology not only enables the operator to exchange sensors easily; it also means that several sensors can be incorporated into a single system to achieve a combination of different measurement ranges and procedures. In addition, we offer a unique modular technology for the automation of metrology. Depending on the industry in question and the type of task, we can offer varying degrees of automation ranging from one-button solutions, where the operator positions the sample by hand, to fully automated test stands incorporating robotics and an interface to the main production control system.

4. How are you coping with the growing globalization of markets?


FRT has been well positioned in the international marketplace for a long time. We maintain subsidiaries in Switzerland, the United States and China, as well as a distribution and service network in Asia and Europe. And we are working constantly to expand and optimize our international structures. Only recently we reached agreement on a joint distribution arrangement for Europe with a company called Euris Corporation.

Euris specializes in the distribution and after-sales support of high-tech industrial equipment and installations within Europe, and offers comprehensive geographical coverage by highly qualified field service engineers. Our Asian distributor network has also continued to expand, and is being coordinated by a sales director assigned by FRT. Permanent staff numbers at our Shanghai facility have also been increased.

As well as an additional administrative assistant we have also hired a service engineer to provide technical support for our local distributors and on-site servicing for customers across the Asian region. In the USA we have moved into spacious new premises in the heart of Silicon Valley, which have given us the additional space we needed.

5. Why are you exhibiting at this year's MicroTechnology?


Deutsche Messe has made MicroTechnology into a real focal gathering for the industry at HANNOVER MESSE. As in previous years, the show presents the complete spectrum of applications-oriented micro- and nanotechnology. Many firms from Germany and other countries worldwide will be giving an overview of the latest advances, developments and trends. We cannot afford not to be there. Trade fair presentations, and the direct link to the customer that they provide, are important for us and form part of the core repertoire of our marketing strategy.

About MicroTechnology

MicroTechnology is ideally placed at the heart of HANNOVER MESSE 2009, where it is located alongside the displays of surface treatments and finishes (in Hall 6), the subcontracting industry (Halls 3 to 5) and industrial process engineering (Halls 6 to 9 and 11). From engineering and materials to production processes and interface management: all the latest commercially viable developments and practical applications in micro- and nanotechnology will be on display at MicroTechnology, along with laser cutting and machining technology.

At the forum "Innovations for Industry" technology suppliers and end users will get together to talk about the latest innovations in microtechnology products, while guest speakers from the scientific community and industry will discuss current and future trends in micro- and nanotechnology.


-Tanja Gerhardt-

Permanent-URL: http://www.automobilsport.com/hannover-messe-april-microtechnology-global-capital-goods-manufacturers-fries-research---55834.html

16.02.2009 / MaP

More News

HANNOVER MESSE 2009, 20 to 24 April Job & Career Market
16.02.2009
- HR recruitment center at world's biggest technology eventThe world economic situation is tense, and only cautious economic prognoses are being made right now. But selecting the right human resources takes on a special significance for enterprises in troubled times. And despite poor economic indicators and a financial crisis, the economy's demand for engin more >>
Hannover Messe 2009, 20 to 24 April - The power of empty space
11.02.2009
Vacuum technology keeps industry on the move Spectacle lenses with anti-reflective and scratch-resistant coatings, flat-screen TVs, solar cells and foam-free bottling of beverages - without vacuum technology, many of the things that we take for granted today would simply not exist. And physically demanding tasks in the packing and despatch departments of in more >>
Wonders in Wood at Ligna Hannover 2009
11.02.2009
LIGNA HANNOVER 2009, 18 to 22 May "Wonders in Wood" in Hall 17    * Enhanced concept meets with broad approval    * 23 international artists, designers and artisans exhibit articles for sale    * Central thematic display by Berchtesgaden vocational school to promote young talentHannover. As in the past, the "Wonder more >>
Belt sander racing comes to LIGNA HANNOVER 2009
10.02.2009
LIGNA HANNOVER 2009, 18 to 22 MayLIGNA HANNOVER is playing host to an unusual new competition this year: For the first time in Germany, the official "Belt Sander Racing Championships" will be staged from 18 to 22 May 2009 at the Hannover exhibition center. The motivation of the organizers: to arouse even greater interest in the woodworking and wood processing more >>
CeBIT 2009, 3 to 8 March - First automotive DAY at CeBIT
10.02.2009
    * New meeting-place for the automobile industry and component suppliers    * Audi CIO Straub a keynote speaker    * Recent study on IT developments in the automobile industryThursday, 5 March 2009, sees the launch of the first 'automotive DAY' at CeBIT (3 - 8 March). The event will be realized in cooperation with the B-to- more >>
LIGNA HANNOVER 2009, 18 to 22 May The art of recycling
09.02.2009
 Efficient wood chip and briquette productionPublic discussion comparing the merits of energetic vs. material applications for wood has led to more efficient use of this natural resource in both areas. Particularly in the field of energetic wood utilization, the issue of efficiency has increasingly come to the fore. There is widespread acceptance today of the f more >>
Z-TEC Istanbul (1 - 4 October 2009)
06.02.2009
    * Z-TEC Istanbul - Woodworking Machinery Fair from 1 to 4 October 2009 in Istanbul    * Deutsche Messe AG and Survey enter into a joint ventureFrom 1 to 4 October 2009 Deutsche Messe AG, Hannover, and Survey Marketing + Consulting GmbH & Co. KG, Bielefeld, will be staging Z-TEC Istanbul at the Istanbul Expo Center more >>
Making IT Happen: Intel CeBIT Highlights 2009
06.02.2009
Auf der CeBIT 2009 (Hannover, 3. bis 8. März) ist Intel an zwei Standorten vertreten und präsentiert unter dem Motto „Making IT Happen“ erlebbare Technik aus unterschiedlichen Lebensbereichen. In Pavillon P33 adressiert das Unternehmen insbesondere Geschäftskunden und zeigt seine Palette an aktuellen 45nm-Produkten. Highlight ist der Intel® Core™ more >>
CeBIT 2009: Digital community converges on Hannover
06.02.2009
From 3 to 8 March 2009 the world's digital community will converge on Hannover for the world's leading exhibition of information technology and telecommunications. The scope of offerings will range from business software and na more >>
Market launch of the first notebook cases by URBAN TOOL at the CeBIT
06.02.2009
From March 3 to 8, 2009, the Viennese Design label for IT-Accessories “URBAN TOOL” is presented at the CeBIT in Hannover. Our weekly news-ticker will inform you in advance about the product highlights which will be presented to the international audience at Germany’s no. 1 market place for digital business. Some of these highlights are the first notebook cases by URBAN more >>
Cebit Hannover : Communications, Products and Innovations, part 1
05.02.2009
CeBIT 2009, 3 to 8 MarchSecure data analysis for Windows platformsData analysis on full-duplex Gigabit Ethernet connections places special demands on data acquisition. more >>
Cheaper flights to CeBIT with Lufthansa
03.02.2009
CeBIT 2009, 3 to 8 March    * Lufthansa now the Official Airline of Deutsche Messe    * Discount of ten to twenty percent on many flightsNext month (3 - 8 March) CeBIT in Hannover will once again be the global focus of the entire ICT sector. Particularly attractive this year is the new travel more >>
Power Plant Technology 2009 - high-tech coupled with a new mood of optimism
03.02.2009
HANNOVER MESSE 2009, 20 to 24 April    * Power Plant Technology 2009 presents innovative high-tech solutions    * The broad-based range of exhibit more >>
MDA presents a complete international spectrum of electric and mechanical transmission systems
03.02.2009
HANNOVER MESSE 2009, 20 to 24 April    * More than 1,100 exhibitors expected at this Leading Trade Fair for Power Transmission and Control"Motion, Drive & Automation (MDA) - Leading Trade Fair for Power Transmission and Control" takes place every more >>
CeBIT: Open Source Business Intelligence mit neuen Palo-Versionen
03.02.2009
Kostenlose Palo Box 3.0 am Jedox Stand in Halle 4, D 53 Die Freiburger Jedox AG zeigt auf der CeBIT 2009 die neue Version 3.0 hrer Palo-Produkte. Die Fachbesucher können sich am Jedox-Stand in Halle 4, D 53 über die neuen Features von Palo OLAP Server 3.0, Palo  Worksheet Server 3.0 und Palo ETL Server informieren.   Palo i more >>
MicroTechnology reveals the future of nanotechnology
03.02.2009
HANNOVER MESSE 2009, 20 to 24 April    * "Nano for Industry" presents innovative materials    * "Schauplatz NANO" showcases production-ready products and solutionsNanotechnology is now part of our everyday lives. Whether in energy technology, environmental engineering or IT, the latest innovat more >>
HANNOVER MESSE 2009, 20 to 24 April - RapidX 2009: Mechatronics in the Process Chain
02.02.2009
    * EPLAN and Rittal team up to demonstrate the cross-disciplinary development of mechatronic productsFor the second time the trade fair Digital Factory is presenting the special display RapidX at HANNOVER MESSE 2009 (20 - 24 April). The tagline for RapidX - "Mechatronics in the Process Chain" - already suggests that the more >>
HANNOVER MESSE 2009 showcases advanced technologies in the field of energy efficiency
02.02.2009
    * Systems monitoring leads to substantial cost reductions    * Modern electric fans hold the key to reduced electricity consumptionHANNOVER MESSE 2009, 20 to 24 AprilEnergy efficiency is a well-established concept in the mechanical and plant engineering sectors. Streamlined more >>
German President Horst Köhler to open HANNOVER MESSE 2009
02.02.2009
HANNOVER MESSE 2009, 20 to 24 AprilThis year German President Horst Köhler will officially open HANNOVER MESSE (the Hannover Fair). Even, or especially in times of crisis, an international more >>
CeBIT et le Luxembourg - un levier économique d’exception
02.02.2009
CeBIT, le plus important salon international traite en un seul lieu de tout ce qui gravite autour des thèmes informatique et télécommunication. Il rassemble annuellement les partenaires commerciaux concernés par c more >>
CeBIT 2009, 3 to 8 March - Webciety responsible for radical changes in business and society
29.01.2009
    * CeBIT reveals impact and opportunities of Internet revolution    * Mass market for open-source software and eLearningIntelligent Web services, social networks, open platform standards and infotainment offerings on demand will be characterizing the Internet of the future. And from 3 to 8 March, CeBIT 2009 will be showcasing all aspects of the more >>
Presenting AutoID/RFID at CeBIT 2009
23.01.2009
Basic technology for the Internet of the Future and tomorrow's logistics:CeBIT 2009, 3 to 8 March    * Featuring over 50 presentations, AutoID/RFID Forum covers gamut of latest automatic identification       and RFID trends    * AutoID/RFID Solutions Park highlights best-practice exa more >>
contractworld.award 2009
17.01.2009
9th International Architecture Prize for Innovative Interior Design Concepts Project descriptions and jury appraisals Prize-winners in the category "Offices / Administration buildings"Office buildings, administration buildings, e.g. for banks, insurance companies, government departments more >>
contractworld.award 2009 at Domotex Hannover - Prize award ceremony with winners from across the world
17.01.2009
DOMOTEX HANNOVER 2009, 17 to 20 January    * Architects from Japan, France and Portugal carry off the top prizes    * Prizes to the value of 60,000 euros awarded for the best projects    * Coveted architecture prize attracts record-breaking number of entriesThe first prizes in the contractworld.award 2009 have gone more >>
More than 500 exhibitors expected at WoodMac China
16.01.2009
More than 500 exhibitors expected at WoodMac China    * Leading international trade show for the woodworking industries at the SNIEC venue in ShanghaiWoodMac CHINA will soon be taking place (from 17 to 20 February 2009) in conjunction with FurniTek China and WoodBuild China at the Shanghai New International more >>
DOMOTEX HANNOVER 2009 - More exhibitors than expected
14.01.2009
DOMOTEX HANNOVER 2009, 17 to 20 January    * Presentation of tomorrow's new trends by 1,400 exhibitors from all over the world    * DOMOTEX scores with new informative events and special displays    * DOMOTEX visitors will be the first to use the new entrance Nord 1DOMOTEX more >>
New research project "FlexPAET" featured at MicroTechnology
14.01.2009
HANNOVER MESSE 2009, 20 to 24 April    * New manufacturing processes optimize the energy efficiency of large-area lighting systems The trade fair MicroTechnology at HANNOVER MESSE 2009 (20 - 24 April) is not only a showcase for finished products and applications, but also a platform for publicizing selected r more >>
MDA - a global visitor magnet HANNOVER MESSE 2009, 20 to 24 April
13.01.2009
   * Trade fair for Motion, Drive & Automation (MDA) under HANNOVER MESSE umbrella helps rev up mechanical and plant engineering industry in 2009As industrial markets become progressively globalized, there is an indispensable need for companies to inform their customers around the world about the latest innovations, system refinements and serv more >>
Ligna Hannover 2009 , 18 to 22 May - Smart tools for intelligent production
08.01.2009
Even the best machines cannot achieve an optimal finish without high-quality tooling. Accumulations of wood shavings, wood chips and sawdust in the vicinity of wood processing machinery often lead to disruptions and a loss of end product more >>
Ministers meet in Hannover - WORLD ENERGY DIALOGUE 2009
07.01.2009
HANNOVER MESSE 2009, 20 to 24 April    * German federal ministers Glos and Steinmeier are joined by Russian Energy Minister Sergei Shmatko    * Environmental expert Professor Klaus Töpfer: Global crisis can serve as catalyst for change in energy        policy &nb more >>
CeBIT 2009, 3 to 8 March Successful debut of CeBIT VISION press event
20.12.2008
    * Big-name speakers from research, government and business enliven Webciety discourse    * Prof. Hans Joachim Schellnhuber, energy and climate advisor to the European Commission, sets forth disaster prevention options    * Kajo Wasserhövel presents digital opportunities for SPD election campaign more >>
CeBIT 2009: Substantial growth for 'Green IT World'
18.12.2008
CeBIT 2009, 3 to 8 March    * Innovative, energy-efficient solutions to be showcased in Hall 8    * Forum features presentations, lectures and discu more >>
CeBIT 2009, 3 to 8 March - 'FutureCare' highlights health care of tomorrow
18.12.2008
    * FutureCare special display to serve as visitor magnet at    * TeleHealth show    * Key topics: Circulatory diseases and diabetesHow more >>
Energy India, MDA India, CeMAT India and Industrial Automation INDIA a clear success
17.12.2008
ENERGY INDIA, MDA INDIA, CeMAT INDIA and Industrial Automation INDIA 2009 will be taking place again from 8 to 11 December 2009 in Bangalore.    * Over 9,500 high-calibre trade visitorsThe four concurrent international trade shows ENERGY INDIA, MDA INDIA, CeMAT INDIA and IA INDIA closed on 13 December after four d more >>
CeBIT an attractive platform for startups
16.12.2008
CeBIT 2009, 3 to 8 March    * Two platforms for startups now offered at CeBIT (halls 5 and 6)    * Crisis represents simultaneous opportunity for startups    * Surprisingly good venture capital climate for green IT and Internet-based business models more >>
CeBIT 2009, 3 to 8 March- Telemedicine gathers momentum in Germany
10.12.2008
    * TeleHealth 2009 takes an in-depth look at telemedicineDoctors checking on pacemakers via the Internet. Emergency treatment for stroke patients carried out with advice from a specialis more >>
Seamless overage of entire energy complex at HANNOVER MESSE
04.12.2008
HANNOVER MESSE 2009, 20 to 24 April * Powerful trio: Energy, Power Plant Technology and the new Wind show * Energy efficiency a hot topic throughout HANNOVER MESSE more >>
Digital Factory Hannover: IT solutions for industrial processes
02.12.2008
HANNOVER MESSE 2009, 20 to 24 April * Spotlight on Customer Relationship Management (CRM)* RapidX presentation illustrates the role of mechatronics in the process chain An integral part of the HANNOVER MESSE portfolio, "Digital more >>
INTERSCHUTZ 2010 at Leipzig : Global innovations showcase
28.11.2008
INTERSCHUTZ 2010, 7 to 12 June   * International Trade Fair for Rescue Services, Fire Prevention, Disaster Relief, Safety and Security In June 2010 Leipzig, Germany, will be the place to be for anyone involved in more >>
2001-2020 copyright automobilsport.com