 |
SEAT begins construction on a pioneering, one-of-a-kind battery laboratory in Spain
08.10.2020: The new Test Center Energy requires an investment of more than 7 million euros
Vehicles, cell modules and battery groups can be tested in the facility’s 1,500 m2 area and 1.3 megawatts of testing capacity
|
The new Test Center Energy requires an investment of more than 7 million euros
Vehicles, cell modules and battery groups can be tested in the facility’s 1,500 m2 area and 1.3 megawatts of testing capacity
The future centre will position the company as a benchmark in the development of solutions for electromobility

SEAT continues to take steps forward in its commitment to electrification. With this aim in mind, the company has begun work on the future Test Center Energy (TCE), the new automotive battery lab that will be located at the SEAT plant in Martorell.
With an investment of more than 7 million euros, the new centre will develop and test various energy systems for electric and hybrid vehicles. With a testing capacity that can reach 1.3 MW simultaneously, this facility will become a one-of-a-kind, pioneering electric battery laboratory in Spain.
The construction of the TCE is included in the 5 billion euro investment plan recently announced by the company.
The future building, whose construction will be completed in April 2021, will have an area of around 1,500 square metres and include different test spaces for the evaluation of cell modules with lithium-ion technology, medium and high voltage batteries, as well as different chargers used in the entire range of electrified vehicles.
There are also plans for several climatic chambers that will enable the batteries and modules to be tested under extreme thermal conditions, simulating the different environments a car may experience during its life cycle. It will also feature a high-tech electronics lab to design and manufacture prototypes and build interfaces for the test systems.
In addition, a workshop will be set up that is specifically designed and equipped to carry out tests on electrified vehicles, with the capacity to work simultaneously with up to six cars. This space will be used to conduct various tests related to the performance of the energy system, functional safety and integration of functions. To this end, artificial vision systems will be incorporated into the instrumentation.
According to SEAT Vice-president for R&D Werner Tietz, “We are very excited to announce the launch of this project. SEAT has been committed to the electrification of the company for years and the construction of this unique new Test Center Energy in Spain is a firm step in this direction. This new battery lab will enable us to develop the energy systems of future hybrid and electric vehicles, thus contributing to the creation of sustainable electromobility.”
Ten years of battery research
The new TCE will join the combined low, medium and high voltage battery lab built by the company in 2010. Over the past decade, SEAT has carried out national and international research projects and conducted more than 2,000 test cases. This facility has two climatic chambers and a test power of 200kW.
Electrifying SEAT
The carmaker is currently undergoing a transformation towards the electrification of the company and its brands. SEAT and CUPRA are going to launch five new electric and plug-in hybrid models in 2020 and 2021, which will be added to the electric version of the commercially available SEAT Mii.
The Leon family will have plug-in hybrid electric models under the SEAT and CUPRA brand, manufactured in Martorell; the SEAT Tarraco will have a PHEV version and the CUPRA Formentor, the first model designed and developed for the CUPRA brand, will also have plug-in hybrid electric variants, which will be manufactured in Martorell. In addition, the CUPRA el-Born will join the SEAT Mii electric as the company’s second all-electric vehicle. The new Test Center Energy provides the company with its own lab for testing the batteries of the future.
- Seat also photo
Permanent-URL:
|
Stream-0D Manufacturing zero defect : simulation in real time in Centrale Nantes
07.10.2020
|
The STREAM-0D project to develop a solution for Zero-Defect Manufacturing has come to a successful conclusion. Centrale Nantes takes stock of the promising results.STREAM-0D is a European project, with Horizon 2020 funding, under the ‘Factories of the Future&rs more >> |
Hyundai Motor Group Announces New Horizons Studio to Develop Ultimate Mobility Vehicles
30.09.2020
|
Hyundai Motor Group announces the formation of New Horizons Studio and appointment of innovative leadership from Silicon Valley.
New team is focused on the development of Ultimate more >> |
Mahle and Ballard to cooperate on fuel cell development for commercial vehicles
28.09.2020
|
MAHLE and Ballard Power Systems Inc. agree on cooperation Goal is to develop and industrialize fuel cell systems for commercial vehicles of various weight classes Focus on the needs of the European, North American, and Asian markets
more >> |
Bits & Pretzels Event 2020: Audi offers digital showcase for start-ups and expert talks
24.09.2020
|
Audi is once again an active partner in this year’s Bits & Pretzels event and is offering added value through a virtual dialogue with international experts For the first time, online sessions will give the virtual pa more >> |
EIT InnoEnergy Invests over 4 Million Euro in Electric In-Wheel Drive Pioneer Elaphe Propulsion Technologies
24.09.2020
|
EIT InnoEnergy, one of Europe’s leading investors in sustainable energy and electric mobility innovations has announced a 4.2 million Euro A+ investment in Elaphe Propulsion Technologies Ltd. (Elaphe), a world leader in electric in-wheel-drive technology for electric vehicles. more >> |
Innovating the construction industry with the new Mercedes-Benz Arocs
23.09.2020
|
Superb savings: advanced Predictive Powertrain Control optimises fuel consumption, particularly on interurban routes Safe like no other: only the latest generations of assistance systems in the Arocs & more >> |
Blockchain project wins Startup Autobahn innovation award
23.09.2020
|
Eighth round of the innovation platform: five projects with Porsche participationThe final round of Europe’s largest innovation platform, Startup Autobahn, is taking place in virtual form for the first time today and tomorrow (23 and 24 September). More t more >> |
Augmented Reality: New Opel Mokka Can Park on Driveways Today
16.09.2020
|
Mokka goes augmented reality: Multi-channel social media awareness campaign AR filter adds a digital Mokka to real life photographs and videos New Mokka shows what Opel stands for today and in the future Innovative car presentation: place yourself in a video next to the vir more >> |
Audi at the GREENTECH FESTIVAL - A story about tomorrow, live event
15.09.2020
|
Focus on decarbonization of the supply chain and CO2-neutral production Show debut of the Audi Q4 Sportback e-tron concept car Combination of live event in Berlin and online content via https://greentechfestival.com/ more >> |
Lucid Motors Partners with ZeroLight to Reshape the Luxury Automotive Purchase Experience
10.09.2020
|
The Lucid Air launches with a pioneering cloud-based customer journey, allowing for digital exploration and customization of the luxury EV sedan using visualization technology from gaming industryLucid Motors has partnered with ZeroLight to launch a pioneering, clou more >> |
Groupe Renault tested a blockchain project to go further in the certification of vehicle compliance
10.09.2020
|
XCEED is a digital project resulting from Groupe Renault’s collaboration with major players in the automotive industry. A full-scale trial was carried out with several equipment manufacturers at Renault’s Douai plant. more >> |
BASF launches Glasurit 100 Line, sets the new standard for sustainability and profitability in the refinish business
08.09.2020
|
Glasurit, the premium refinish paint brand of BASF, introduces its most advanced waterborne basecoat system – 100 Line. Focusing on a new standard of sustainability, process efficiency and highest product quality, the new line meets the highest requirements of modern body shops. more >> |
Hyundai Motor Group, SK Innovation to Collaborate on Development of EV Battery Industry Ecosystem
08.09.2020
|
Collaboration to cover diverse areas including EV battery sales solutions, battery reuse and recycling Strengthen the stability of the battery supply chain and maximize added value by creating a virtuous cycle of resources Two parties to enhance competitiveness of battery reuse business in the EV more >> |
Groupe Renault announces a project to develop its organization around its brands
03.09.2020
|
Groupe Renault announces today a plan to develop its organization around its brands, grouping them mainly into four business units (BU): Renault, Dacia, Alpine and New Mobility. The objective would be to give each BU an autonomous organization.This proje more >> |
Facts and figures on Mercedes Benz Factory 56
03.09.2020
|
Construction: 2½ years Overall ground area 220,000 square meters, corresponding to 30 soccer pitches Excavated earth: approximately 700,000 cubic meters   more >> |
Official opening of Factory 56 and start of production of the new Mercedes−Benz S−Class
03.09.2020
|
With its Factory 56, Mercedes-Benz is presenting the future of productionFlexible, digital, efficient and sustainable: Factory 56 embodies the future of production at Mercedes-Benz and sets new standards for the automotive industry. With an investment o more >> |
Ford, Bedrock and Bosch are exploring highly automated vehicle technology in Detroit to help make parking easier
27.08.2020
|
Ford Escape research vehicles begin demonstrating first U.S. infrastructure-based solution for highly automated valet parking Using a sophisticated set of infrastructure-based sensors in Bedrock‘s Assembly Garage, vehicles drive and park themselves inside the enclosed garage Drivers more >> |
McLaren unveils all-new, innovative lightweight vehicle architecture
25.08.2020
|
Mike Flewitt, CEO of luxury supercar maker McLaren Automotive, today confirmed the introduction of the brand’s all-new, flexible, lightweight vehicle architecture which will underpin its next generation of electrified supercars.The new a more >> |
NIO launches Battery as a Service (BaaS) to make EVs more cost competitive and flexible
20.08.2020
|
Thanks to NIO’s vehicle battery swap system with options for upgradable batteries, NIO BaaS offers a breakthrough in EV pricing to increase adoption Premium EV manufacturer NIO has officially launched Battery as a Service (BaaS) for custom more >> |
SEAT transforms its Prototype Development Centre and commits to 3D printing
20.08.2020
|
The company has built a new 3,000 m2 facility with the aim of unifying all the processes prior to the manufacture of a future vehicle
The new space includes virtual re more >> |
Automechanika to launch digital offensive in September
13.08.2020
|
Online workshops and networking with a Who’s Who of the industryMaintaining contact is more important now than ever – Automechanika is offering new digital networking opportunities for everyone who had been looking forward to coming to Frankfurt thi more >> |
FUSO Future Innovation Lab: eCanter SensorCollect demonstrates open innovation culture
11.08.2020
|
Daimler Trucks’ Japan-based subsidiary FUSO has recently showcased its leading role in the development of innovative trucks with advanced technologies. With its “FUSO Future Innovation Lab” event, the company introduced its innovative eCanter SensorCollect concept truck with a d more >> |
Digital Mercedes-Benz production ecosystem MO360: global production networked in real time
06.08.2020
|
Enhanced efficiency thanks to new family of applications: Mercedes-Benz Cars Operations 360 (MO360) makes complex vehicle pr more >> |
BASF and Toyota collaborate for lightweighting success on 2021 Sienna
06.08.2020
|
The new Sienna generation features first-of-its-kind third row free-standing seatbacks BASF solution results in 30% weight reduction and 15% cost savings vs prior generationBASF and Toyota Motor North Am more >> |
Leveraging EV/PHEV as Resources for Virtual Power Plants Commencement of Trial Operation of V2G Business Demonstration Facilities
06.08.2020
|
Thirty companies including Tokyo Electric Power Company Holdings, Inc. have used the grant to cover the costs of its "FY2020 Demonstration Project for the Construction of a Virtual Power Plant that Utilizes Demand-Side Energy Resources (VPP Aggregation Project)," for which a public offering was made by the Ministry of Economy, Trade and Industry (METI) through its Sustainable Open Innovat more >> |
Mercedes−Benz and CATL as a major supplier team up for leadership in future battery technology
05.08.2020
|
High-volume battery supply supports “Electric First” strategy Mercedes-Benz and CATL (Contemporary Amperex Technology Co., Limited) have today announced an enhanced partnership in the field of battery technology. Markus Schäfer, Member of the Board of Management of Daimler AG and Mercedes-Benz more >> |
drivvn launches to accelerate digital sales revolution for car manufacturers and retailers
03.08.2020
|
A new name in automotive digital excellence - drivvn - has launched to power future customer journeys for manufacturers and dealers, as car buyers demand increasingly sophisticated online services.Image: Peter Brown, CEO, drivvn
more >> |
SEAT presents its strategy for the future to major suppliers in Spain
30.07.2020
|
SEAT increases its commitment to component companies located in Spain to reinforce the supply chain and promote sustainability The company is exploring the necessary technologies to be installed in Spain for electrification and the connected car SEAT introduces the S-Rating tool (Sustainabil more >> |
Porsche Digital opens office in Spain - Expansion of the international innovation network
29.07.2020
|
With a new office in Barcelona, the digital subsidiary of Porsche AG is expanding its international network for the development of digital business models. The focus will be on the continuous expansion, development, and implementation of existing as well as new online customer servic more >> |
Dow to showcase products, technologies at Display Week 2020 that improve display assembly, reliability and performance
27.07.2020
|
Company to spotlight growing portfolio of optical silicones to address industry trends toward the use of flexible and large format displays Dow (NYSE: Dow) will showcase two advanced products and four new innovative technologies for next-generation consumer electronics and more >> |
BMW adds New SiriusXM with 360L Platform for 2021
16.07.2020
|
Standard on most 2021 BMW models starting from July 2020 production. On Demand programming available any time. Personalized, curated entertainment. Listen to SiriusXM anywhere with your All Access subscription. more >> |
SKODA AUTO Vrchlabi plant launches automated ordering and supply of parts for CNC processing lines
13.07.2020
|
› Internet of Things (IoT) technologies enable further automation at the high-tech Vrchlabí site
› CNC processing lines automatically order parts, supplied by automatic robots more >> |
Dow launches new high-performance thermal gel for 5G technology that promotes environmental sustainability and efficient assembly
13.07.2020
|
High thermal conductivity silicone gel eliminates silicone oil bleeding and has ultra-low levels of VOCs once fully cured Dow (NYSE: Dow) introduced today new DOWSIL™ TC-3065 Thermal Gel, a one-part, thermally conductive gel d more >> |
Porsche develops new application for 3D printing together with Mahle and Trumpf
13.07.2020
|
Innovative pistons from a 3D printer for increased power and efficiency3D printing technology is already used at Porsche in prototype construction, manufacturing spare parts for classic sports cars as well as in other areas. more >> |
Groupe Renault and Google Cloud partner to accelerate Industry 4.0
09.07.2020
|
Groupe Renault teams up with Google Cloud to accelerate the digitization of their production facilities and supply chain This collaboration brings Google Cloud’s strength in machine learning and artificial intelligence together with Renault’s expertise in automotive manufacturing to create new industrial solu more >> |
SKODA AUTO files the most patent applications of all Czech companies in 2019
07.07.2020
|
› Innovation: the number of ŠKODA AUTO applications has been increasing for years› Legal certainty: patenting new ideas is part of ŠKODA AUTO’s company philosophy and protects the brand’s intellectual property› Engineering prowess: most of the patent applications come from ŠKODA AUTO’s more >> |
Hypermotion 2020 is gathering momentum – here are some initial highlights from the conference programme
03.07.2020
|
As one of the first trade fairs taking place this year, Messe Frankfurt’s Hypermotion event will be making personal networking possible again from 10 to 12 November 2020. Initial areas of focus: urban air mobility and innovative drone technologies, smart logistics solutions and 3D printing in municipal logistics, and IoT in space and space infrastructure. more >> |
Project Aslan steers a new course for autonomous urban mobility
02.07.2020
|
Unprecedented international collaboration to accelerate the commercial viability of autonomous vehicles in cities with the launch of a fully-functional open-source self-driving platform
Global not-for-profit open-source more >> |
BMW Group - New technology campus for 3D printing goes on stream
25.06.2020
|
BMW Group builds on additive manufacturing, with skills consolidated at single site- Campus as centre for production, research and training - Comprehensive in-house expertise to advance additive manufacturing technology more >> |