How Hyundai is using the latest VR technology to transform car design

How Hyundai is using the latest VR technology to transform car design

15.04.2022: ..and make it more sustainable Hyundai has made significant investments in state-of-the-art virtual reality (VR) technology and infrastructure to transform its design process Company stakeholders can now collaborate across continents

..and make it more sustainable




    Hyundai has made significant investments in state-of-the-art virtual reality (VR) technology and infrastructure to transform its design process


    Company stakeholders can now collaborate across continents in a virtual space to speed up vehicle development and support the planet


    Hyundai’s latest concept SEVEN is the company’s first model to be designed completely digitally





In the past few years, Hyundai Motor has invested in a series of cutting-edge technological solutions to overhaul its design process. By embracing the latest innovations, such as virtual reality (VR) and 3D gravity sketching, the company has consolidated its position at the forefront of car design.



Beyond sheer aesthetics, the benefits of this approach are three-fold. Firstly, Hyundai’s designers are equipped with state-of-the-art tools that enable them to develop models with boundary-pushing features. Secondly, a streamlined digital process speeds up vehicle development. Finally, a lower carbon footprint supports the company’s environmental commitments.






Stepping away from a traditional design approach



Much like today, Hyundai’s designers commenced the initial creative phase by creating pencil sketches on paper in the past. These images would reflect the kind of car they wanted to convey: perhaps one that is dynamic and sporty, or one that is brimming with new technology. Typically, these drawings would feature exaggerated proportions of the car, such as over-emphasised wheels and curves.



Once designers completed their initial sketches, they would compete with one another to have their proposals selected. After a winning design was selected, the chosen model would be developed as a scale model from clay, based on two-dimensional paper sketches.



Developing a scale model would take anywhere between four weeks and two months, depending on the schedule. Afterwards, the scale model would then be scanned and milled in a full-size. However, this approach was not without its drawbacks. After all, when shifting from a scale model to full-size, no line stays the same.



Previously, Hyundai’s designers were required to work together with clay modellers to refine the final design of an upcoming model. However, lines and surfaces had to be marked out using tape. On top of this, the company’s engineers were unable to work simultaneously with the designers, as they could only receive data after scanning the model with a photogrammetry system. Both of these factors made the process very time-consuming and cost-intensive.





It’s OK to fail: sketching remains fundamental for Hyundai designers



Hyundai’s design approach has undergone something of a revolution in recent years. Today, the company’s designers can draw upon a range of innovative tools. Before exploring some of these, it’s important to note that the initial sketching phase – and subsequent competition between different design teams to have their idea selected – remains fundamental to the development of the initial vision behind new Hyundai model.



“If you're scared of doing something new, don't work in design!” says Simon Loasby, who joined Hyundai Motor Company in 2017 as Director of Hyundai Design in China. There, he played an integral role in defining Hyundai’s design identity in the country.



Since 2019, he has been based at HMC’s global R&D and Design Center in Namyang, Korea, as Head of Styling. In this role, he has played a major role in bringing Sensuous Sportiness into the company’s BEV-dedicated IONIQ line-up brand, including IONIQ 5 and Hyundai’s latest concept, SEVEN. Each IONIQ model is like a chess set; they all belong together even though they look and perform differently.



“Design is about not being fearful of getting it wrong sometimes – 99.9 per cent of what a designer does goes in the bin,” says Loasby. “I have a presentation which is called ‘Rubbish’, because the rubbish bin is something that has to become your friend as a designer.



You have to expect that lots of your work will eventually go there: unfortunately 99.9 per cent of the design work we undertake lands in the bin. Our job is to explore and to find that amazing remaining 0.1 per cent. We have to be comfortable with getting things wrong, and we have to encourage our teams that it's OK to get it wrong. If you don't try going down there, you never know what's at the end of the path you're creating.”






VR: the revolution




Modern design technology is now very fast and much more stable. Today, Hyundai no longer produces scale clay models; instead it utilises technologically advanced tools that are more intuitive, such as 3D digital design software. These enable the company’s engineers to mill full scale models using 3D data, which significantly speeds up the design process. Today, 80 per cent of Hyundai’s design development is fully-digital.



Hyundai’s designers work with industry-standard software that has been reprogrammed so that they can work in collaboration across multi-user and multi-location environments. This state-of-the-art technology includes laptops designed for high-performance gaming, in order to handle 3D graphics, motion technology from the film industry, as well as innovations derived from sport.



Using this software, the designers can create models and immersive environments in VR that look extremely close to the real thing. The difference between modern design and the traditional approach is stark, and can be compared to the revolution cars undertook before and after anti-lock braking systems were introduced.



VR technology also opens up a host of new opportunities for Hyundai’s designers. For example, the gravity sketching tool enables designers to create more human-centric vehicle designs by working in 3D from the start. Designers swap their paper and pencils for a headset and controllers to become immersed in VR, imitating gestural interactions through motion tracking. By working in 3D, Hyundai’s designers can experiment with different proportions and build variations based on their ideas. Meanwhile, a 360-degree view of the vehicle allows them to sketch from any angle – in contrast to the traditional 2D process.



3D gravity sketching also enhances the collaboration between Hyundai’s exterior and interior designers. Through this technology, the two teams are able to work together simultaneously. While the exterior design team refine the digital model, the company’s interior designers can work in parallel by virtually stepping inside the car to develop features or make quick adjustments.



Another advantage of this technology is Hyundai’s designers’ ability to test unlimited colour options and material applications, including fabrics and leather, ambient lighting and other types of materials. As well as saving time, this also reduces shipping and travelling costs. In addition, this approach is much more sustainable as significantly less waste is produced, resulting in a dramatic reduction of CO2 emissions.






Hyundai’s VR design evaluation system



Hyundai’s design journey in multi-user wireless VR spaces started in 2017. Then, in December 2019, Hyundai Motor Company and Kia Motors Corporation announced an ambitious new virtual reality (VR) design evaluation system. Two years on, this has now been fully implemented. The system demonstrates a heightened focus on enhancing vehicle development processes through the implementation of VR technology. It simulates many aspects relating to a model under development, including interior and exterior design elements, as well as lighting, colours and materials.



These cutting-edge facilities in Namyang, Rüsselsheim, and Irvine, California, allow the designers to review a multitude of design concepts earlier in the developmental process, and in ways that were previously physically impossible. VR headsets allow colleagues from Hyundai’s Design and Engineering departments to enter into a virtual conference in real-time and simultaneously undertake vehicle design quality assessments and development verification processes, no matter where they are in the world.



Hyundai has also established remote VR design assessment capabilities to enable real-time virtual collaboration between its design centers in Europe, Korea, China, India, Japan and the U.S.. The benefits for the company are clear: it has facilitated greater cross-team – and intercontinental – collaboration than ever before.



These changes were already underway before COVID-19 emerged and sent the world into lockdown in early 2020. According to Simon Loasby, the pandemic served as a catalyst for Hyundai’s global design workforce, accelerating the transition to digitalisation and agile working.



“When our studios across the world were sending all the designers home, we were fortunate that we were already operating a very well-oiled machine in terms of remote virtual connection, where we could all connect across three different continents and five different locations into a virtual working space and walk around the cars,” says Loasby.



At the 2021 AutoMobility LA, Hyundai unveiled the SEVEN concept, its first fully-digitally designed model. Its expansive exterior design leverages Hyundai Motor Group’s Electric-Global Modular Platform (E-GMP). Meanwhile, its interior architecture guarantees greater freedom and comfort for passengers. With furniture-like seats and hygienically-focused functions, it provides a premium lounge experience.



“During the pandemic, our SEVEN concept really benefited from this virtual process. When we completed the digtial design sign off of the car, Luc Donckerwolke (Executive Vice President for Design and Chief Creative Officer of Hyundai Motor Group), SangYup Lee (Senior Vice President at HMC and Head of Hyundai Global Design Center) and I were all in completely different locations, while our European team were in the discussion, too. We were in the same virtual location looking at the model, and did a complete virtual sign off of the whole car: both exterior and interior. Remarkably, I hadn’t seen the physical model at that point, which must be a world-first for a lead automotive designer!”






Simon Loasby’s ‘James Bond suitcase’



Further evidence of Hyundai’s technological innovation can be found in the form of a small portmanteau the company’s digital team built especially for Simon Loasby. So enamoured is Hyundai’s Head of Styling with the portable device, he affectionately refers to it as his ‘James Bond suitcase’ in reference to the famous cinematic spy (and fellow Briton). Loasby recently spoke about it when he appeared on Hyundai’s Are We There Yet? podcast.



Shaped inconspiculously like a travel bag, Loasby’s ‘James Bond suitcase’ is equipped with a laptop, VR goggles, cables and handsets. He is able to take it anywhere and participate in virtual design reviews with colleagues from all around the world.



“I’m very fond the carry-on bag I call my ‘James Bond suitcase’, because it ensures I can connect to our virtual conferencing space and conduct design reviews from anywhere, at any time,” says Loasby. “In fact, one of the craziest design reviews I did was at Incheon Airport. I was about to fly somewhere, but I needed to check in on the progress of a development quickly. So I took the gear out, plugged it in and set up my virtual studio next to Starbucks and conducted a review from the departure terminal!”







Introducing Hyundai’s state-of-the-art European Vision Lab




Hyundai’s European Design Center is based at Hyundai Motor Europe Technical Center (HMETC) in Rüsselsheim, Germany. Over the last five years, this regional headquarters has worked in much closer collaboration with the company’s global R&D Center in Namyang. The aforementioned advancements in VR technology allow designers based at HMETC to communicate with their counterparts in Korea at a much earlier stage of development.



HMETC’s 20x23m Vision Lab, which was previous used for analogue presentations, recently received a substantial upgrade. This was completed in November 2021. It has been completely renovated and is now outfitted with some of the most advanced design technology in the automotive industry, including 48 cameras with active tracking, underscoring Hyundai’s transition to becoming a Smart Mobility Solution Provider.



“Our new HMETC Vision Lab is a marvel in terms of infrastructure and technology. The combination of 3D software and VR goggles enables us to dive into a virtual environment, seeing the car in full size and 3D as if we were standing right next to a physical model,” says Thomas Bürkle, Hyundai’s Chief Designer in Europe. “In this virtual 3D environment, we can also stand just one metre away from our Global Head of Design, who is based 10,000 kilometres away from the European studio. This means we’re able to freely exchange concepts within our global design organisation and make much quicker developmental decisions and technical assessments from the very outset of a project.”



One of the major enhancements to HMETC’s Vision Lab is its LED wall, which features an integrated 8K video system. Up to six to eight streams can be displayed on the screen, which allows people who are not participating in a virtual conference with VR headsets to join.



HMETC colleagues also have access to state-of-the-art goggles by HP. These are equipped with a clip from renowned motion tracking provider OptiTrack, which features eight trackers that give light signals to the cameras. Boasting accuracy within one centimetre, the goggles offer a very precise visualisation of the design that is close to a real-world replication.



“In the Vision Lab, our designers are able to make adjustments to the digital model with much greater accuracy using not just VR, but also AR and mixed reality. They’re able to hone in on a bumper detail using digital laser pointers, for example, and can define lines and shapes more accurately and efficiently than in the past,” says Bürkle. “The almost immediate visualisation of design data can also be quickly shared with engineers at a very early stage of the project, so the designers get faster feedback for modifications. These levels of precision allow Hyundai to respond quickly and react with agility to the needs of our customers, as well as the paradigm shifts in the automotive industry.”





VR technology promises a sustainable future



VR technology is continuing to evolve. In the future, it will offer much higher levels of detail and operate at far quicker speeds. It is therefore set to play an increasingly prominent role for Hyundai’s designers and engineers. In addition, advances in AR and mixed reality will enable the company’s colleagues to interact with one another even more immersively.



However, one fundamental benefit that should not be overlooked is its positive environmental impact. A digital design process produces are much lower carbon footprint, as far fewer clay, paper and waste materials are used in the process. For the development of SEVEN, Hyundai produced one clay model for verification at the end, rather than a multitude of scale clay models. By meeting in a virtual conference space, Hyundai’s designers are no longer required to frequently travel around the globe, expending thousands of air miles in the process. Going forward, this will contribute towards Hyundai achieving its goal of carbon neutrality by 2045.





Mark Griffiths- photos Hyundai

Permanent-URL: http://www.automobilsport.com/hyundai-latest-vr-technology-transform-car-design-sustainable---236372.html

15.04.2022 / MaP

More News

Stellantis Participates In U.S. Test of 5G Connected Vehicle Technologies for Real-time Safety Notifications
05.04.2022
    5G Automotive Association tests in-vehicle and pedestrian real-time safety notifications using high-speed 5G cellular and multi-access edge computing technology    Stellantis was only automaker involved in Virginia trial; Jeep® Wrangler 4xe plug-in hybrid used for tests    Connected vehicle in more >>
Parkopedia and APCOA PARKING Group partner to enable digital parking services of the future
29.03.2022
•    APCOA FLOW digital parking payment service joins Parkopedia’s in-car integrated payment platform solution for automakers•    Single sign-on functionality and ANPR technology will allow for seamless in-car, automated payments for drivers at an additional 1.5 million spaces across Europe• &nbs; more >>
New software generation 3.0 with additional innovative boost for the ID. family
21.03.2022
Cloud-based and with swarm intelligence:Intelligent driver assistance systems as the “Travel Assist with Swarm Data” set new standards.  ID. Software 3.0 with latest driver assistance systems, greater charging capacity and voice c more >>
INNTQ announces ROCO, the world’s first interactive roller coaster experience
10.03.2022
With its one-of-a-kind customized rides and a unique plug-and-play design, ROCO is built to delight riders and venue operators alike. more >>
Petal Maps Debuts at MWC 2022, Showcasing a Full-Scenario Ecosystem with Mapping Services as the Core
04.03.2022
Huawei has unveiled Petal Maps, its latest map navigation system designed for global markets, at Mobile World Congress 2022 (MWC) in Barcelona. The solution leverages mobile phone hardware and intelligent algorithms to deliver a package of innovative mapping capabilities, including precise indoor and outdoor positioning, lane guidance, offline maps, 3D a more >>
AutoFlight’s Prosperity I Air Taxi Achieves Proof of Concept Transition Test Flight
18.02.2022
    AutoFlight is one of the first eVTOL companies in the world to successfully achieve a transition flight for an eVTOL capable of carrying three passengers and a pilot    A ‘transition’ sees an aircraft move from a vertical to horizontal motion and is one of the most challenging parts of an eVTOL flight  more >>
Communication interface for automated guided vehicles
14.02.2022
As a communication interface, VDA 5050 enables the integration of different automated guided vehicles in a common system and thus a building block for Industry 4.0.Coordination between automated guided vehicles (AGVs) more >>
SEAT CODE exports its mobility software Giravolta to six countries
11.02.2022
    Giravolta already manages more than 3,200 vehicles (cars, motorbikes, bicycles and scooters) and more than 120,000 users    Since the beginning of the year, Bleeper's bikesharing service has been operating in Dublin thanks to the mobi more >>
Unique Aeronautical partnership inspired new rear win for Lexus LC Flagship Coupe
07.02.2022
    Long-term Lexus collaboration with world champion air race pilot Yoshihide “Yoshi” Muroya enables exchange of automotive and aeronautical innovations    The unique partnership has already produced advances in aerodynamics and inspired a new rear carbon fibre wing for the LC Flagship Coupe    more >>
Hyundai Motor Group Recruiting Startups for 2022 ZER01NE Accelerator First Half Open Call
07.02.2022
    Hyundai Motor Group invites startups to apply for 2022 first half innovation program to collaborate with Hyundai and Kia on future technologies    Startups can apply to one of 38 projects under seven different tech themes, including auto tech, in-car UX, charging, mobility services, smart logistics, smart construction, and materi more >>
BMW Group invests in innovative method for CO2-free steel production
01.02.2022
BMW Group plans to source steel produced with green power and hydrogen from northern Sweden    New agreement with Salzgitter AG provides for delivery of low-carbon steel from 2026    BMW Group expands sourcing of more >>
DuPont Personal Protection Announces Launch of Thermo-Hand™ Technical Evaluation Unit
01.02.2022
One-of-a-kind demonstration tool aids in evaluation of thermal hand protection performance   DuPont (NYSE:DD) today announced the launch of Thermo-Hand™, the latest burn evaluation unit created to demonstrate the heat and flame more >>
SKODA AUTO uses seat covers made from recycled PET bottles
26.01.2022
- ŠKODA AUTO consistently focuses on sustainability along the entire value chain- Car manufacturer works with suppliers and the scientific community on innovative materials which are then used in series production- Video reveals how the seat covers for the ENYAQ iV are made from wool and recycled disposable bottles  more >>
3D sketching: a digital touch to every drawing
19.01.2022
  As is the case with film, video games, and landscape mapping, the past few decades has seen the automotive industry incorporate more technological advancements in 3D modelling to bring its projects to life. Nowadays, before a car can be sent to the production line, it must first more >>
Introduction The World's first electric flying racing car pilots - with video
18.01.2022
•    After historic first drag-race, Airspeeder announces first 3 pilots   •    Competitors drawn from backgrounds as broad as elite motor racing and drone flying more >>
REE commences trials of all-new electric P7 modular platform for delivery fleets
07.01.2022
    The new P7 platform is based on specifications from one of world’s largest delivery companies       First prototypes will be available for customer evaluation in Q1 2022 with trials to take plac more >>
Amazon and Stellantis Collaborate to Introduce Customer-Centric Connected Experiences Across Millions of Vehicles
06.01.2022
... Helping Accelerate Stellantis’ Software Transformation Amazon and Stellantis will collaborate to deliver software solutions for Stellantis’ new digital cabin platform, STLA SmartCockpit, starting in 2024 more >>
Goodyear extends airless tire technology to autonomous starship robots
05.01.2022
Today, The Goodyear Tire & Rubber Company announced it has developed and is testing a custom-engineered non-pneumatic (airless) tire (NPT) to support Starship delivery robots.   Starship Technologies, a Goodyear Ventures portfolio com more >>
WirelessCar Announces Global Launch of Smart EV Routing at CES 2022
05.01.2022
WirelessCar, a global leader in transformative digital vehicle services for connected cars, today announced the global launch of Smart EV Routing, a dynamic digital product that enables drivers of electric vehicles (EVs) to optimize their long-distance journeys. Wir more >>
Hyundai Motor Group Executive Chair Outlines Direction for 2022 in Metaverse New Year Address
03.01.2022
    Executive Chair Euisun Chung outlined the Group’s direction for 2022 and key future business targets through the New Year Address delivered in the metaverse to employees    The Group to continue making progress towards becoming global top-tier eco-friendly brands by working towards carbon neutrality with a focus on electrif more >>
SEAT Innovation: the motor of transformation
29.12.2021
Innovation, disruption, and transformation.       Laura Vidal, head of Innovation and Social Collaboration in Human Resources at SEAT S.A., and Victoria Gago, co-founder of the European Blockchain Convention & Tech more >>
Zain Bahrain Selects Tecnotree for Digital Transformation
29.12.2021
Tecnotree, a global provider of Digital Business Support Systems (BSS), has been selected by Zain Bahrain, a telecommunications industry innovator in the Kingdom, for the delivery of digital BSS transformation. Zain aims to become a leading ICT and dig more >>
TBSI developed a multi-dimensional intuitive human-machine interface for smart gloves based on triboelectric nanogenerator sensors
28.12.2021
Hongyan Fu's group and Wenbo Ding's group at Tsinghua-Berkeley Shenzhen Institute, Tsinghua University Shenzhen International Graduate School, have made important achievements in the research of novel HMI. The more >>
Ford Bronco Sport Becomes First Vehicle to Feature Parts Made of 100% Recycled Ocean Plastic
08.12.2021
    Ford adds to its legacy of using sustainable materials in its vehicles and becomes the first automaker to use 100% recycled ocean plastics to produce car parts; wiring harness clips in Ford Bronco Sport are the first of many the company plans to produce using discarded plastic fishing nets    Ocean plastic is collected by workers more >>
Chemical researchers invent bio-petroleum for sustainable materials
25.11.2021
Led by CSP Investigators Michelle Chang and Paul Dauenhauer, researchers have developed a two-step pathway to produce petroleum-like liquids from renewable materials, such as glucose.The hybrid approach more >>
SYNETIQ announces industry-leading 96.3% vehicle recycling figure
23.11.2021
    SYNETIQ steps-up the fight against waste with new standards of operational excellence    The UK’s leading integrated vehicle salvage, dismantling and recycling company now recycles more of each vehicle than ever before    New Carbon Literacy toolkit has also been launched in partnership with leadi more >>
Tata Communications GlobalRapide powers enterprises with intelligent, automated, cloud- first unified communications
22.11.2021
- A single partner to drive end-to-end UCaaS business needs Tata Communications, a global digital ecosystem enabler, today announces the launch of Tata Communications GlobalRapide, an end-to-end managed uni more >>
Delta is Partner of Webasto Following Development of Thermal Management Solution for Automotive Roof Sensor Modules
19.11.2021
Delta, a global leader in power and thermal management solutions, today announced is partner by Webasto, the world’s leader in automotive roof solutions. With this partnership, Webasto leveraged Delta’s expertise in active and passive thermal management more >>
His Royal Highness the Crown Prince announces the establishment of the first non-profit city in the world
16.11.2021
His Royal Highness Mohammed bin Salman bin Abdulaziz Al Saud, Crown Prince, Founder and Chairman of the Board of Mohammed bin Salman Misk Foundation, today announced the launch of Prince Mohammed Bin Salman Non Profit City, the first non-profit city in the world, to be a model for the development of the non-profit sector globally and an incubator for youth and volunteer groups as well as more >>
Yamaha Motor’s SpinForged Wheels - with video
12.11.2021
  An aluminium “bartender” whose work led to lighter weightDeveloped for the all-new 2021 MT-09 motorcycle, Yamaha’s SpinForged Wheels established a new and innovative way to reduce weight through the flow f more >>
e.GO Mobile electric vehicle manufacturer announces launch of smart Battery Swap service – the "e.Pit"
04.11.2021
-  Solution positions e.GO as one of the only city BEVs that offers smart battery swap.-  It underpins the Company's focus on leveraging innovation to enhance the ecological footprint of electric vehicles, mainly impacted by the use of large batteries.-  Unique service is intended to provide e.GO customers with peace of mind and comfort more >>
Hyundai Motor Group Hosts ZER01NE DAY 2021, a Playground for Creative and Innovative Talent
02.11.2021
    ZER01NE DAY 2021 to include various creative content from collaboration between Hyundai Motor Group and contributors from a variety of areas     After a pandemic break, ZER01NE DAY returns Nov. 5-14 as a virtual more >>
Ford Brain Research Could Hold the Key to More Quickly Identifying When Drivers Switch off at the Wheel
27.10.2021
•    Ford is working with neuroscientists to develop a faster and more effective way to detect when drivers are tired, distracted or not concentrating   •    Driver fatigue may be a more >>
SEAT - Drones in the factory of the future
21.10.2021
    Innovation is paving the road to electrification with industrial transformation solutions    SEAT S.A. and Eurecat are working on an innovative project that uses drones to transport parts autonomously on the production li more >>
Volkswagen tests 5G for production on its way to smart factories
20.10.2021
Pilot project at the Wolfsburg plant: Volkswagen launches local 5G network for its production operations  The Transparent Factory in Dresden tests control of driverless transportation systems using 5G  Fast and reliable data transfer will increase efficiency and flexibility in production  Setup and operation of the 5G more >>
BMW i Ventures Announces Investment in Battery Startup Our Next Energy
18.10.2021
BMW i Ventures announced today an investment in Our Next Energy Inc. (ONE), a Michigan-based energy storage solutions company working to develop longer range, lower cost batteries for electric vehicles.  “Our Next Energy more >>
Genesis ranks highest overall for tech innovation in J.D. Power US Tech Experience Index study
09.10.2021
J.D. Power designated Genesis as its highest ranked brand overall and in the premium segment in the J.D. Power 2021 U.S. Tech Experience Index (TXI) Study, released this week. Genesis earned the top Innovation Index score of 634 by offering a high level of advanced technologies across its product lineup. more >>
Vattenfall Solar Team presents Nuna11, the 'Picasso of solar cars'
08.10.2021
The Vattenfall Solar Team unveiled their latest solar car, the Nuna11, on 8 July. The most striking feature is the unique design. The solar car is a three-wheeler with the third wheel in an u more >>
CAKE Kalk AP now on Duty in Africa "Electric Bush Bike Anti-Poaching”
08.10.2021
The CAKE anti-poaching system, including the specifically engineered Kalk AP off-road bikes and “mobile solar panels-in the field charging power stations”, are now on duty in Africa.CAKE, the Swedish electric motorbike manufacturer, has succe more >>
2001-2023 copyright automobilsport.com