IDTechEx Explores Nine Startups Innovating Polymer Additive Manufacturing

IDTechEx Explores Nine Startups Innovating Polymer Additive Manufacturing

09.02.2023: Essential to understanding the evolution of the polymer 3D printing industry is exploring the change from low-cost printing technologies and materials to the slow growth and adoption of innovative polymer printing technologies and materials, from viscous


Essential to understanding the evolution of the polymer 3D printing industry is exploring the change from low-cost printing technologies and materials to the slow growth and adoption of innovative polymer printing technologies and materials, from viscous thermosets to carbon fiber composites to foams.



While several new technologies and materials have originated from legacy players like Stratasys and 3D Systems, many have been created by startups looking to push polymer AM’s boundaries in its capabilities and applications.

 

In IDTechEx’s market report on 3D printing, “Polymer Additive Manufacturing 2023-2033: Technology and Market Outlook”, the polymer AM industry is forecast to rise to over US$21 billion by 2033.



This technical market report includes 85 forecast lines across polymer hardware and materials and over 50 company profiles from promising startups to market leaders, material players, and more. This was completed with an extensive number of primary interviews to bring the reader the latest and most accurate information.



In doing this primary research, IDTechEx has identified many startups looking to improve every aspect of the polymer AM supply chain, from hardware to software to materials; some are even acting as vertical integrators to deliver parts made with innovative AM technologies straight to end users. This article explores a selection of these innovators; further discussion on emerging players can be found in IDTechEx’s report on “Polymer Additive Manufacturing 2023-2033: Technology and Market Outlook”.




Innovators in Polymer AM Hardware



Many polymer 3D printer manufacturers have sought to address the throughput concerns inherent with additive manufacturing with varying degrees of success. One of the more unique approaches has been pioneered by Evolve Additive Solutions, who developed a technology called Selective Electrophotographic Thermoplastic Process (STEP) that combines elements of powder bed fusion, sheet lamination, and 2D laser printing.



With STEP, a layer is imaged onto a charged drum, where the imaged areas become discharged. The drum passes through a bed of charged thermoplastic particles, picking up a layer of particles onto the drum matching the image. This layer is passed onto a conveyor belt and taken to the build platform, where the layer is aligned with and fused to the part using heat and pressure.



Through STEP, a very high build rate can be achieved (a maximum of 100 cm3/hour), which Evolve Additive states enables their Scalable Volume Production (SVP) printers to more convincingly compete with injection molding at medium-high part volumes.



Meanwhile, developers of volumetric additive manufacturing look to flip the current 2.5D layer-wise nature of additive manufacturing on its head. VAM consists of a group of technologies that print a 3D object in a single step, rather than printing 2D slices layer-by-layer to create a 3D object; importantly, VAM potentially enables significant improvements in 3D printing speed and surface finish, two persistent issues for polymer additive manufacturing.



Two startups commercializing VAM are Xolo and Readily3D, who are developing the respective VAM technologies: Xolography and Tomographic 3D Printing. While Xolo focuses on photopolymer resins, Readily3D focuses more on biocompatible materials for medical applications, like photosensitive acrylates, silicones, and hydrogels.



A key challenge for both will be overcoming the typical material limitations of 3D printable photosensitive materials. Still, VAM presents an interesting opportunity to address two critical drawbacks of 3D printing and potentially access new applications.





Innovators in Polymer AM Materials




Speaking of material limitations, polymer 3D printing materials contend with many; materials players across the industry look to address these limitations, given the importance of 3D printing materials to the market.



According to IDTechEx forecasts, polymer AM materials revenue has surpassed that of polymer AM hardware sales and will grow past US$15 billion by 2033. These forecasts from IDTechEx break down how polymer AM materials will evolve over the next ten years.    
       
                         
       

Different startups look to address different challenges inherent with polymer AM materials, whether they be cost, performance, or sustainability. For example, AlphaPowders is looking to reduce the cost of thermoplastic powders, which IDTechEx forecasts to be the most in-demand type of polymer AM materials by 2033.



Materials cost is a major concern for end-users, given that 3D printing materials can be more than ten times the cost of their injection molding equivalent. AlphaPowders are hoping to reduce these costs by developing equipment that converts cheaply synthesized thermoplastic powder into AM-grade powder, thus lowering the end price per kilo for AM thermoplastic powder.



While polymer 3D printing is often assumed to be unsuitable for end-use functional applications, startups making high-performing materials like Tiamet3D look to break that barrier down. Tiamet3D hopes to make 3D printing of performance parts more accessible through their composite PLA filament incorporating nano-diamonds.



Lastly, sustainability in manufacturing is a major consideration for players across all verticals, from automotive to consumer goods to aerospace. While 3D printing reduces materials waste in general, most polymer 3D printing materials are derived from fossil-fuel-based feedstock.



Looking to increase the sustainability of polymer 3D printing materials is startup Reflow, who have developed a filament production process using recycled plastic. According to Reflow, their recycled PETG (polyethylene terephthalate glycol) filament has attractive material properties while making use of recycled PET plastic feedstock. The growth of sustainable materials for 3D printing adds a new dimension to the sustainability discussion taking place in the additive manufacturing industry.




Innovators in Polymer AM for Part Production




A growing segment of innovators in polymer AM are using their own proprietary hardware and/or materials to supply parts directly to end-users. Not only do these startups innovate on their printing technology and feedstock, but they’re also innovating with their choice of business model, a change from the classic 3D printer manufacturer.



One example is Bond3D, who are supplying parts made from their high-temperature thermoplastic rod extrusion technology that reduces voids and increases end-part performance. Another example is Arevo, whose continuous carbon fiber composite extrusion technology has been applied in the sporting goods and furniture industry.



Some startups have been built to target specific applications, like OPT Industries, whose roll-to-roll stereolithography approach (RAMP) uses mechanical metamaterials to make nasal swabs for biomedical applications. Regardless of the technology or applications, it is clear that these polymer AM startups are exploring new ways of getting polymer 3D printed parts into end-users hands.



This article shows the range of activity taking place in the polymer additive manufacturing market. For detailed profiles on many of the companies mentioned in this article and many more, please see the IDTechEx report “Polymer Additive Manufacturing 2023-2033: Technology and Market Outlook”. This report gives a targeted analysis of this industry, providing the latest forecasts with key technical insights.



For more information on this report, please visit www.IDTechEx.com/PolymerAM or for the full portfolio of 3D printing research available from IDTechEx





Lucy Rogers, IDTechEx

Permanent-URL: http://www.automobilsport.com/idtechex-explore-startups-innovating-polymer-additive-manufacturing---247418.html

09.02.2023 / MaP

More News

With the foundation of the joint venture Cofinity-X, ten partners of the automotive industry will further foster the adoption of the Catena-X network
31.01.2023
    Mercedes-Benz, BASF, BMW Group, Henkel, SAP, Schaeffler, Siemens, T-Systems, Volkswagen and ZF jointly founded Cofinity-X to accelerate the operation and adoption of Catena-X use-cases throughout the automotive industry.    Cofinity-X aims to operate an open marketplace for applications and provide products and services to more >>
Cutting edge electric-global modular platform delivers world-leading innovation and tech to Genesis GV60
25.01.2023
  Genesis GV60 uses the brand’s world-leading Electric-Global Modular Platform       Innovative features help deliver greater efficiency, performance and driving pleasure    Pi more >>
Driving lubricants innovation: TotalEnergies Lubrifiants launches its new RobotQuartz campaign
12.01.2023
TotalEnergies Lubrifiants is back with a new campaign featuring RobotQuartz. This advertising character is used to represent the engine and show the effects of the Quartz lubricants on all types of engines.    more >>
Stellantis Signs Binding Agreement with Element 25 Limited for Manganese Sulphate Supply for Electric Vehicle Batteries
09.01.2023
    Stellantis strengthens value chain for electric vehicle battery production supporting Dare Forward 2030 strategic plan targets    Binding agreement with Element 25 runs for five years with provisions to extend term and increase volumes  more >>
Genesis introduces World first keyless entry face recognition technology on 2023 GV60
13.12.2022
- Genesis GV60 will be the first car in the world to feature pioneering face recognition technology as part of biometric vehicle entry and engine start   - Other new features include Digital Key, which grants access f more >>
CAKE Commits to Developing the Kibb - A Semi-Autonomous Electric ATV for Regenerative Farming
13.12.2022
CAKE, the Swedish maker of premium lightweight, electric motorcycles, will move forward with development of the Kibb, an electric, semi-autonomous, all-terrain four-wheeler designed to handle the unique needs of regenerative farming.   The Kibb is more >>
Immersive Virtual Reality Technology Further Advances Honda’s EV Design Capabilities
13.12.2022
    Next-generation VR was key technology in styling of 2024 Honda Prologue EV    VR provides immersive environments for Honda designers and engineers to collaborate on next generation of products more >>
Breathe easy, feel great inside your Lexus with nanoe™ X
12.12.2022
    Lexus rolls out next generation nanoe™ X[1] system across all line-ups; a technology created by Panasonic       Nano-sized water particle diffusion technology creates a cleaner, healthier in-car en more >>
Renault Group is accelerating the decarbonisation plan for its plants in France and innovating with new partners
24.11.2022
- Voltalia, ENGIE, and Dalkia.    Renault Group announces three major partnerships with energy players;    With Voltalia, the largest green electricity supply contract in France to cover up to 50% of the electricity consumption of its production activities in 2027 through the installation of photovoltaic more >>
Four ERC Starting Grants 2022 awarded to Politecnico di Milano
23.11.2022
The Politecnico di Milano obtains a full four ERC Starting Grants 2022in support of highly advanced scientific research The European Research Council (ERC), the European Union organisation that rewards talented scholars engaged in cutting-edge research, is funding four projects with Pr more >>
Audi premieres innovative recycled seatbelt buckle covers
23.11.2022
Audi has launched cutting-edge plastic covers for seatbelt buckles in its Q8 e-tron models; the casings are partially manufactured from mixed automobile plastic waste using a chemical recycling process. It is the first time the company is installing sa more >>
Continental - Recognizing complex traffic situations with artificial intelligence
21.11.2022
Continental successfully concludes its research of PRORETA 5 on recognizing complex traffic situations with artificial intelligence for automated urban driving.   The aim of the PRORETA 5 research project (2019 to 2022) was more >>
Academic Projects Shine Bright at the Debut of Prototypes for Humanity
16.11.2022
Engaging university talent across all science and creative disciplines from over 100 countries, the first edition of Prototypes for Humanity Awards feature winners from the UK, Turkey, Singapore and Ghana  presenting the most diverse assembly of impact-driven innovations for a better world more >>
Yamaha Motor to Adopt Plant-Derived Next-Generation Materials for Personal Watercraft Parts
16.11.2022
- World’s first practical use for vehicle parts -Yamaha Motor announced that it will adopt plant-derived cellulose nanofiber (CNF) reinforced resin for marine products as an initiative toward reducing CO2 emissions and the Company’s environ more >>
CAKE and Volta Trucks join forces to provide world's first electric microhub for last mile deliveries
15.11.2022
Rolling hubs and couriers on two wheels   CAKE, the Swedish maker of premium lightweight, electric motorcycles, and Volta Trucks (www.voltatrucks.com) today announced a joint initiative for providing global fashion giant the H& more >>
HERE HD Live Map Powers hands-free driving and routing functionalities in the new BMW 7 Series.
07.11.2022
    The BMW Group launches SAE Level 2+ automated driving with HERE HD Live Map    The new 2023 BMW 7 Series is the first vehicle to roll out SAE Level 2+ automated driving at speeds up to 85 mph in the US and Canada. & more >>
BMW ///M Mixed Reality revolutionizes driving experience- Highly dynamic and completely real turns in a virtual world
05.11.2022
- World premiere of ///M Mixed Reality at Web Summit 2022 in Lisbon - Revolutionary use of Mixed Reality technologies brings real cars onto virtual racetracks  At this year's Web Summit in Lisbon, the BMW Group more >>
World-first: Abarth trials facial recognition technology to measure driver and passenger enjoyment
01.11.2022
    In a first-of-its-kind trial, performance car brand, Abarth, has turned to facial recognition technology to quantify the emotions experienced when driving and being a passenger    Conducted by Dr Dale Esliger, from Loughborough University, participants were put through driving challenges at Mallory Park racetrack more >>
EAV2Cubed eCargo bike surpasses international safety standard
01.11.2022
EAV’s EAV2Cubed powers through European EN15194 safety testElectric Assisted Vehicles Limited (EAV), the Oxfordshire-based sustainable zero-emissions vehicles manufacturers, have successfully passed the EU and international safety standard t more >>
From scrap tyres to door handles - Mercedes-Benz takes firm grip of circularity
25.08.2022
    Mercedes-Benz tackles circularity with BASF and start-up Pyrum Innovations AG    Industry first: chemical recycling enables circular manufacture of virgin-quality plastics for technically demanding and safety-critical Mercedes-Benz vehicle components    Pyrolysis oil from scrap tyres and certified more >>
Hyundai Motor Group Presents HMG Smart City Vision at 2022 World Cities Summit
01.08.2022
    Hyundai Motor Group presents a human-centered future city vision that is well connected by mobility solutions while coexisting harmoniously with nature    HMG Smart City is a sustainable green city concept enabled by autonomous mobility, advanced air mobility, robotics and hydrogen fuel cell technology &nbs; more >>
Modular Assembly: Innovative assembly and logistics concept is about to be ready for serial production
26.07.2022
   Flexible system without conveyor belt or fixed pace simplifies dealing with high product variance        Integrated logistics and quality checks increase efficiency by about 20 percent        Human-centric: work environment also designed to accommodate employees with disabilities more >>
Smart Production: How Audi Is Designing the Production of the Future
26.07.2022
   Cycle-independent modular assembly simplifies work with high product variability        Virtual inspection of surfaces serves as a digital interface between design, technical development, and production        Robot dog named Spot supports 3D scanning in production halls   more >>
pax.world: "Metaverse of the Year" launches first public land sale
21.07.2022
- pax.world announces first official public land sale on Tuesday 26 July 2022- AIBC's 'Metaverse of the Year' – pax.world previously raised $5.8 Million in its seed and private round- OpenSea will host the land sale with a limited selection of tiles granting landowners early access to pax.world, plus membership of the exclusive '500club' more >>
Membrane mining: Sustainable extraction of high-tech metals
12.07.2022
   Research: Audi Environmental Foundation promotes innovative mining approach        Underground: Microinvasive process and membrane technology protect the environment         more >>
Stellantis to Host Startup Awards July 13 to Introduce Key Technology Partnerships
01.07.2022
  Stellantis N.V. announced today it will host the Stellantis Startup Awards on Wednesday, July 13, 2022, at 2:30 p.m. CEST / 8:30 a.m. EDT. The digital event will introduce seven key technology partners that will accelerate Stellantis’ transformation into a sustainable more >>
“Arena del Futuro” Demonstrates Capability of Dynamic Inductive Recharging Technology for Electric Vehicles
11.06.2022
•    “Arena del Futuro” (“Arena of the Future”) circuit built by A35 Brebemi in collaboration with Stellantis and other partners field tests revolutionary dynamic induction electric charging for EVs•    Testing with Fiat New 500 shows that Dynamic Wireless Power Transfer (DWPT) simplifies the customer appr more >>
Lexus highlights safety innovation on World Bicycle Day - with video
03.06.2022
    World-first Safe Exit Assist technology can prevent accidents caused by “dooring” – car doors being opened into the path of cyclists       Safe Exit Assist combines Blind Spo more >>
Lamborghini on World Bee Day - Technological innovations for the study of bees and CO2 analysis
19.05.2022
On the occasion of World Bee Day on 20 May, the growing population of 600,000 Lamborghini bees is busy monitoring CO2 levels in the area surrounding the super sports car manufacturer’s Sant’Agata Bolognese headquarters. With 13 hives estab more >>
Next Generation of Energy-Saving Systems (ESS) Project is launching on Kickstarter!
05.05.2022
•    The new development saves up to 20% on your energy bills and extends the life of your household appliances.  Valencia - A group of enthusiasts, interested in energy-saving solutions, announced that the world's first patented energ more >>
Porsche AG acquires stake in innovative producer of battery materials
04.05.2022
Sports car manufacturer leads funding round at Group14 TechnologiesPorsche is forging ahead with its drive to develop and manufacture high-performance battery cells: the sports car manufacturer is acquiring shares in the US company Group14 Technologi more >>
How Hyundai is using the latest VR technology to transform car design
15.04.2022
..and make it more sustainable    Hyundai has made significant investments in state-of-the-art virtual reality (VR) technology and infrastructure to transform its design process    Company stakeholders can now collab more >>
Stellantis Participates In U.S. Test of 5G Connected Vehicle Technologies for Real-time Safety Notifications
05.04.2022
    5G Automotive Association tests in-vehicle and pedestrian real-time safety notifications using high-speed 5G cellular and multi-access edge computing technology    Stellantis was only automaker involved in Virginia trial; Jeep® Wrangler 4xe plug-in hybrid used for tests    Connected vehicle in more >>
Parkopedia and APCOA PARKING Group partner to enable digital parking services of the future
29.03.2022
•    APCOA FLOW digital parking payment service joins Parkopedia’s in-car integrated payment platform solution for automakers•    Single sign-on functionality and ANPR technology will allow for seamless in-car, automated payments for drivers at an additional 1.5 million spaces across Europe• &nbs; more >>
New software generation 3.0 with additional innovative boost for the ID. family
21.03.2022
Cloud-based and with swarm intelligence:Intelligent driver assistance systems as the “Travel Assist with Swarm Data” set new standards.  ID. Software 3.0 with latest driver assistance systems, greater charging capacity and voice c more >>
INNTQ announces ROCO, the world’s first interactive roller coaster experience
10.03.2022
With its one-of-a-kind customized rides and a unique plug-and-play design, ROCO is built to delight riders and venue operators alike. more >>
Petal Maps Debuts at MWC 2022, Showcasing a Full-Scenario Ecosystem with Mapping Services as the Core
04.03.2022
Huawei has unveiled Petal Maps, its latest map navigation system designed for global markets, at Mobile World Congress 2022 (MWC) in Barcelona. The solution leverages mobile phone hardware and intelligent algorithms to deliver a package of innovative mapping capabilities, including precise indoor and outdoor positioning, lane guidance, offline maps, 3D a more >>
AutoFlight’s Prosperity I Air Taxi Achieves Proof of Concept Transition Test Flight
18.02.2022
    AutoFlight is one of the first eVTOL companies in the world to successfully achieve a transition flight for an eVTOL capable of carrying three passengers and a pilot    A ‘transition’ sees an aircraft move from a vertical to horizontal motion and is one of the most challenging parts of an eVTOL flight  more >>
Communication interface for automated guided vehicles
14.02.2022
As a communication interface, VDA 5050 enables the integration of different automated guided vehicles in a common system and thus a building block for Industry 4.0.Coordination between automated guided vehicles (AGVs) more >>
2001-2023 copyright automobilsport.com