Tweet
Porsche develops new application for 3D printing together with Mahle and Trumpf

Porsche develops new application for 3D printing together with Mahle and Trumpf

13.07.2020: Innovative pistons from a 3D printer for increased power and efficiency 3D printing technology is already used at Porsche in prototype construction, manufacturing spare parts for classic sports cars as well as in other areas.


Innovative pistons from a 3D printer for increased power and efficiency



3D printing technology is already used at Porsche in prototype construction, manufacturing spare parts for classic sports cars as well as in other areas.




In cooperation with its partners Mahle and Trumpf, the sports car manufacturer is now establishing a new milestone in the use of additive manufacturing processes for highly-stressed drive components – for the first time, the pistons for the high-performance engine of the 911 flagship model, the GT2 RS, are now also being produced with a 3D printer.




3D printing allows the pistons to be manufactured with a structure that is optimised for the loads acting on the pistons. As a result, the pistons from the advance development project weigh ten percent less than the forged series production pistons.





They also have an integrated and closed cooling duct in the piston crown that could not have been produced by conventional methods. “Thanks to the new, lighter pistons, we can increase the engine speed, lower the temperature load on the pistons and optimise combustion,” explains Frank Ickinger from the advance drive development department at Porsche. “This makes it possible to get up to 30 PS more power from the 700 PS biturbo engine, while at the same time improving efficiency.”




Building up parts layer by layer permits realisation of new and improved designs



There are a number of different technologies for 3D printing. All are based on the principle that the components are built up layer by layer without the need to previously manufacture a special tool or mould. Practically any geometric shape can therefore be realised. The printer can be fed with the design data directly from the computer.



Additive manufacturing processes are thus ideal for producing structures that have been designed and optimised by means of artificial intelligence (AI). The pistons of the 911 GT2 RS were manufactured from high-purity metal powder using the laser metal fusion process (LMF).


Here, a laser beam heats and melts the powder surface corresponding to the part contour. Porsche initiated the joint project together with cooperation partners Mahle and Trumpf. The quality and performance capability of the components were validated using measurement technology from Zeiss.







Wide application field and new potential uses for 3D printing at Porsche



Porsche already uses additive manufacturing processes in several areas. For example, a 3D-printed bodyform full bucket seat has been available since May for the model series 911 and 718. Here, the central section of the seat, in other words the cushion and backrest surfaces, is partly produced by a 3D printer.



Customers will be able to choose between three firmness levels (hard, medium, soft) for the comfort layer in future. Porsche Classic also uses additive processes to reproduce plastic, steel and alloy spare parts that were previously no longer available. A release lever for the clutch of the Porsche 959, for example, today comes from a 3D printer.




Around 20 reproduced parts for Porsche classic models are currently manufactured using additive processes. This manufacturing technology is also technically and economically interesting for Porsche for special and small series as well as motorsports. 3D printing therefore offers significant potential for Porsche with regard to product and process innovations, which will in turn allow customers to benefit from fascinating and individual products.




Bernard Van Bellingen- photos Porsche

Permanent-URL: http://www.automobilsport.com/porsche-new-application-3d-printing-mahle-trumpf-cooperation---208929.html

13.07.2020 / MaP

More News

Groupe Renault and Google Cloud partner to accelerate Industry 4.0
09.07.2020
    Groupe Renault teams up with Google Cloud to accelerate the digitization of their production facilities and supply chain    This collaboration brings Google Cloud’s strength in machine learning and artificial intelligence together with Renault’s expertise in automotive manufacturing to create new industrial solu more >>
SKODA AUTO files the most patent applications of all Czech companies in 2019
07.07.2020
› Innovation: the number of ŠKODA AUTO applications has been increasing for years› Legal certainty: patenting new ideas is part of ŠKODA AUTO’s company philosophy and protects the brand’s intellectual property› Engineering prowess: most of the patent applications come from ŠKODA AUTO’s more >>
Hypermotion 2020 is gathering momentum – here are some initial highlights from the conference programme
03.07.2020
As one of the first trade fairs taking place this year, Messe Frankfurt’s Hypermotion event will be making personal networking possible again from 10 to 12 November 2020. Initial areas of focus: urban air mobility and innovative drone technologies, smart logistics solutions and 3D printing in municipal logistics, and IoT in space and space infrastructure. more >>
Project Aslan steers a new course for autonomous urban mobility
02.07.2020
Unprecedented international collaboration to accelerate the commercial viability of autonomous vehicles in cities with the launch of a fully-functional open-source self-driving platform     Global not-for-profit open-source more >>
BMW Group - New technology campus for 3D printing goes on stream
25.06.2020
BMW Group builds on additive manufacturing, with skills consolidated at single site- Campus as centre for production, research and training - Comprehensive in-house expertise to advance additive manufacturing technology more >>
Mercedes-Benz and NVIDIA to Build Software-Defined Computing Architecture for Automated Driving Across Future Fleet
24.06.2020
Auto and Computer Industry Leaders Intend to Join Forces and Enable Next-Generation Fleet with Software Upgradeability, AI and Autonomous CapabilitiesMercedes-Benz, one of the largest manufacturers of premium passenger cars, and NVIDIA, th more >>
BMW announces support for Digital Key for iPhone
23.06.2020
A secure and easy way to use iPhone as a car key to lock, unlock, drive, and share keys with friends.At today’s Apple Worldwide Developer Conference it was announced that BMW will become the first carmaker to enable its more >>
Ford Co-Pilot360™ Technology Adds Hands-Free Driving...
22.06.2020
... Over-The-Air Updates and More to Help Ford Customers Feel More Relaxed     Ford Co-Pilot360™ Technology – a comprehensive collection of available driver-assist features – adds and improves offerings includi more >>
Leading Urbantech Accelerator Urban-X by Mini reveals eight startup cohort
22.06.2020
...launches first-ever fully remote program URBAN-X, the leading accelerator for startups reimagining city life, and backed by MINI and Urban Us, announces its eighth cohort of companies. Reflecting the current climate, all com more >>
Avanci Awarded as Technology Pioneer by World Economic Forum
16.06.2020
• The World Economic Forum announced its selection of 100 of the most promising Technology Pioneers of 2020, who are shaping industries from agriculture to healthcare while also working on sustainability issues and much more.• Avanci was selected for its work in accelerating innovation for the Internet of Things, by enabling sharing of key technologies more >>
INEA implementing the Innovation Fund
15.06.2020
As of 15 June 2020, INEA will be managing the Innovation Fund (IF).The Innovation Fund, which is the successor of the NER 300 programme, is one of the world's largest funding programmes for demonstration of innovative low-carbon technologies with the objective more >>
Jobs of the Future and the Emerging Megatrend
12.06.2020
•    We are living through a fundamental transformation in the way we work. Automation and 'thinking machines' are replacing human tasks and jobs•    How humans respond to these challenges and opportun more >>
UN to explore role of science and technology policies in Covid-19 recovery
05.06.2020
Science, technology and innovation (STI) policies will play a key role not only in post-COVID-19 recovery plans, but also in the decade of action to deliver on the 2030 Agenda for Sustainable Development. more >>
Support for innovation in the European car industry: EIB finances Gestamp's RDI strategy to the tune of €200 million
26.05.2020
    EU bank funds will contribute to the development of safer, lighter and more environmentally friendly vehicles    Agreement supported by Investment Plan for EuropeThe Spanish multinational Gestamp, which specialises more >>
SEAT and David Calle join forces to boost youth education
05.05.2020
    The teacher, YouTuber and founder of Unicoos is the company’s new Ambassador of Education and Youth Empowerment    The carmaker manufacturer and the revolutionary teacher aim to jointly promote an educational change in Spain, so that young people can successfully face the labour challenges of the future  &nb more >>
AIWAYS introduces world-first EV battery technology
04.05.2020
•    Unique ‘sandwich’ structure reduces risk of battery safety incidents •    World-first structure makes it impossible for leaking coolant to enter the battery module, even after substantial impact more >>
The Circularity Challenge: Finding novel solutions for a circular economy
23.04.2020
BASF, Greentown Labs and Stanley Black & Decker select five start-ups to drive circular innovations for plastics, energy storage and digital solutions.Greentown Labs, the largest cleantech start-up incubator in North America, and BASF, one o more >>
"Reclaim the Future” – the FUTURE FORUM by BMW Welt to cooperate with 1E9.
22.04.2020
•A total of eight events are planned at BMW Welt, which will take place digitally for the time being, as well as a joint event at the 1E9 conference. •The series titled “Reclaim the Future” will feature trend-setting themes examined and discussed by experts between April and December 2020. more >>
AIWAYS granted patents for autonomous EV charging solution
17.04.2020
•    European and Chinese patents cover robot design and charging method•    Autonomous mobile fast charging robot, ‘CARL’, offers a cost-effective and flexible charging solution•& more >>
Cupra harnessing 3D printing to boost speed, safety and efficiency
27.03.2020
    New Leon Competición model to use 3D printed door mirrors, air intakes and cooling intakes    CUPRA using state-of-the-art multi-jet fusion technology for the race vehicle    3D printed parts tested in wind tunnel face gusts of more than 180mph    Parts help reduce fuel consu more >>
The world’s first aerogels made from scrap rubber tyres
19.03.2020
Photo caption: A team of NUS researchers led by Assoc Prof Duong Hai-Minh (front row, first from left) and Prof Nhan Phan-Thien (front row, centre), developed the world’s first aerogels made from scrap rubber tyresA team more >>
Porsche presents innovative 3D-printing technology for bucket seats
17.03.2020
Concept study on individual seat fitting inspired by motor sportsPorsche is revolutionising sporty seating: the company presents an innovative alternative to conventional bucket seat upholstery with the concept study “3D-printed bodyform full-b more >>
BradyPrinter - Identify cables 3 times faster
14.03.2020
Experienced operators can print and manually apply a flag label on a cable in 15 seconds. With the new BradyPrinter A5500 Flag Printer Applicator they can significantly increase production output by flagging cables in 5 seconds. more >>
New Ford Tec steers clear of ditches and drops to help drivers stay on the road
13.03.2020
Driving in rural areas can be tricky when unmarked road edges become ragged and give way to open land, muddy ditches and sheer drops.  *Driving at night – in unlit areas especially – can be a challenge.Most road fat more >>
Fast Company announces CAKE among the WORLD'S MOST INNOVATIVE COMPANIES
10.03.2020
CAKE, the Swedish manufacturer of lightweight electric off-road performance motorcycles, has been selected to the list of the Most Innovative Transportation Companies 2020 by Fast Company -The only 2 wheeled company to make the list. CAKE is among t more >>
FPT Industrial F28 “Diesel of the Year®” 2020 displayed at Conexpo Show
10.03.2020
The “Diesel of the Year®” landed in Las Vegas for its premiere in North America. The F28 was unveiled last November and has been recently awarded “Diesel of the Year®”. This prestigious award is given on an annual basis by Diesel magazine and recognizes the best innovation in the development and manufacturing of diesel engines in all industrial and automotive app more >>
SEAT will be able to detect if you fall asleep at the wheel
06.03.2020
    SEAT working with technology start-ups to drive better road safety    Computer Artificial Intelligence ensures driver is awake and not distracted    36% of collisions are due to driver distraction or tiredness    Active glazing technology another route of development for future SEAT more >>
The Goodyear reCharge Concept - Making Tyre Changing Easy with Customized Capsules that Renew your Tyres
04.03.2020
The Goodyear reCharge is a revolutionary self-regenerating concept tyre that can adapt and change to meet individual mobility needs."Goodyear wants the tyre to be an even more powerful contributor to answering consumers' more >>
FPT Industrial joins European Research Project for Nextgeneration batteries
03.03.2020
FPT Industrial is participating in the European battery research project SeNSE, officially launched last month. Together with five other industrial companies and five research institutes, the Brand will work over the four coming years to find solut more >>
From bottle to fabric: Seat upholstery made of PET
25.02.2020
New Audi A3 with sustainable interior concept        Up to 45 PET bottles with a capacity of 1.5 liters used per seating system        Many additional components made from secondary raw mate more >>
A Porsche as personal as your own fingerprint
24.02.2020
 Innovative printing method for body paintworkIt's already the case that hardly any Porsche is the same as another. But from now on, the 911 can even be as unique as the papillary lines on a human fingertip. Using an innovative direct printing meth more >>
Hyundai and Kia Develop World’s First ICT Connected Shift System
20.02.2020
    Information and communication technology (ICT) automatically shifts to optimal gear based on road and traffic conditions ahead    Improves driving comfort and fuel efficiency by minimizing unnecessary shifts through predictive gear-shifting control system    Future developments to include consideration more >>
Porsche Consulting: Three new offices and an innovation lab
18.02.2020
   Management consultancy grows revenues by 17.4 percent and opens three new officesPorsche Consulting recorded revenues of €203.1 million for 2019, which represents a year-over-year growth rate of 17.4 percent and a new a more >>
SEAT - This is how you explore the future
17.02.2020
A global technology hub    SEAT and Xplora are looking for innovative solutions in one of the world's biggest technology hubs    In Tel Aviv (Israel) there are 6,600 startups, 800 of which are dedicated t more >>
BMW i Ventures Announces Investment in AutoFi.
13.02.2020
BMW i Ventures announced today an investment in AutoFi, a technology company transforming the way cars are bought and sold.Headquartered in San Francisco, CA, AutoFi is a retail platform that allows car buyers to purchase and finance a car from a variety of financial institutions within or outside the dealership. Thanks to AutoFi’s deep integration more >>
Cupra - A 3D printed racecar
06.02.2020
    CUPRA commits to 3D printing in the development of the new Leon Competition    The door mirror, air intakes and cooling intakes have been produced with state-of-the-art HP Multi Jet Fusion technology& more >>
Hengst: Premiere for Blue.on in the new Opel Astra
05.02.2020
Lifetime functional safetySystem has won two German innovation awardsThe concept of the Blue.on filter consists of a housing, a pipe with integrated filter bypass and no more >>
Newly established SKODA AUTO DigiLab India and Software Development Centre support SKODA-led INDIA 2.0 project
31.01.2020
› ŠKODA AUTO DigiLab India is the fourth innovation hub, joining those based in Prague, Tel Aviv and Beijing› Dedicated Software Development Centre in Gurugram and P more >>
Ford develops 3D-printed locking wheel nuts to thwart thieves
30.01.2020
    Ford-patented unique lock nuts, personalised by owners, could prevent alloy wheel theftsAs car security systems become increasingly more sophisticated, thieves are targeting car parts instead, including alloy wheels. more >>

2001-2020 automobilsport.com full copyright